Technical Data; Performance Data - ProMinent Makro TZ Operating Instructions Manual

13

Technical data

Only with "M - modified" design:
13.1

Performance data

Main pumps with 1500 rpm motor at
50 Hz operation
Type Minimum pump capacity at max‐
imum back pressure
bar
120260 12*
120340 12*
120430 12*
120510 12*
120650 12*
70430 7
70570 7
70720 7
70860 7
71070 7
40840 4
41100 4
41400 4
41670 4
42100 4
WARNING!
Risk of personal injuries
Please observe the "Supplement for modified ver‐
sion" at the end of the chapter!
It replaces and supplements the technical data!
Maximum
stroke rate
l/h ml/stroke Strokes/min
260 60
340 60
430 60
510 60
640 60
430 99
570 99
720 99
860 99
1070 99
840 194
1100 194
1400 194
1670 194
2100 194
* Material versions PP, PC, TT max. 10 bar
** Material versions PPT, PCT, TTT / SST
The shipping weight applies to single head pumps without an add-
on power end.
The permissible priming pressure on the suction side is approxi‐
mately 50% of the max. permitted back pressure.
With double head pumps, the maximum permissible back pressure
reduces from 7 to 5.5 bar or from 4 to 3 bar.
All figures refer to water at 20 °C.
The suction lift applies to filled suction line and filled liquid end -
when installed correctly.
The priming lift of 2 m applies to clean and moistened valves and a
clear outlet.
Suction Connector
lift size
m WS
72 4 1 1/2 - 25
96 4 1 1/2 - 25
120 4 1 1/2 - 25
144 4 1 1/2 - 25
180 4 1 1/2 - 25
72 3.5
96 3.5
120 3.5
144 3.5
180 3.5
72 3 2 1/4 - 40
96 3 2 1/4 - 40
120 3 2 1/4 - 40
144 3 2 1/4 - 40
180 3 2 1/4 - 40
Technical data
Shipping
weight**
G-DN kg
46/54
46/54
46/54
46/54
46/54
2 - 32 50/64
2 - 32 50/64
2 - 32 50/64
2 - 32 50/64
2 - 32 50/64
56/80
56/80
56/80
56/80
56/80
73