Note 1) The value for cylinder port fitting port size C6.
Note 2) Based on JIS B 8375-1993 (Supply pressure: 0.5 MPa, with indicator light and surge voltage suppressor, clean air. This will change depending on pressure and air quality.)
The value when ON for the double type.
Standard Specifications
Valve construction
Fluid
Max. operating pressure
Min. operating pressure
Ambient and fluid temperature
Max. operating cycle
Pilot valve exhaust method
Pilot valve manual override
Lubrication
Impact resistance/Vibration
resistance
Note 3)
Enclosure
Coil rated voltage
Allowable voltage fluctuation
Coil insulation type
Power consumption
24 VDC
(Current)
Note 1)
Use dry air to prevent condensation when operating at low temperatures.
Note 2)
Valves with the external pilot specifications have a pilot EXH with individual exhaust specifications.
Impact resistance: No malfunction occurred when it is tested with a drop tester in the axial direction
Note 3)
and at the right angles to the main valve and armature in both energized and de-
energized states every once for each condition.
Vibration resistance: No malfunction occurred in a one-sweep test between 8.3 and 2000 Hz. Test
was performed at both energized and de-energized states in the axial direction
and at the right angles to the main valve and armature.
4 way/4 and 5 port, rubber seal, solenoid pilot valve, interchangeable with the nvj series, low power consumption: 0.5w, base mounted/body ported configurations, manifolds with built-in 'one-touch' fittings (42 pages)