Table of Contents
Advertisement
S0700
Series
Manifold Optional Parts
Blanking plate
SS0700-10A-1
It is used by attaching on the manifold block
for being prepared for removing a valve for
maintenance reasons or planning to mount a
spare valve, etc.
Mass: 25 g
External pilot [-R]
This can be used when the air pressure is 0.1 to
0.2 MPa lower than the minimum operating pres-
sure of the solenoid valves or used for vacuum
specifications.
Add R to the part numbers of manifolds and
valves to indicate the external pilot specification.
An M5 port will be installed on the top side of the
manifold's SUP/EXH block.
b How to Order Valves (Example)
S0710 R -5
External pilot
b How to Order Manifold (Example)
∗ Indicate R for an option.
SS0750-08C4FD1-R
External pilot
Built-in silencer, Direct exhaust [-S]
This is a type with an exhaust port atop the manifold end
plate. The built-in silencer exhibits an excellent noise
suppression effect. (Silencing effect: 30 dB)
Note) A large quantity of drainage generated in the
air source results in exhaust of air together
with drainage.
∗ When ordering assemblies incorporated with a
manifold, add suffix "-S" to the manifold no.
∗ For precautions on handling and how to replace
elements, refer to "Specific Product Precautions."
Spacer for Individual SUP/EXH
SS0700-PR-1
If this spacer is installed instead of a valve, it
is possible to add SUP and EXH ports. In
this condition, the A port should be an SUP
port and the B port an EXH port.
∗ Specify the spacer mounting position and
SUP/EXH passage shut off positions on the
manifold specification sheet.
∗ The spacer comes with a SUP block plate
and an EXH block plate.
∗ Electrical wiring is also connected to the
spacer mounting position.
648
Plug-in
External pilot port
(M5 x 0.8)
2
B
2
B
A
4
A
4
Exhaust port
Block plate (Ordering not required)
D side
3(R)
1(P)
2
B
2
B
2
B
EXH
port
A
4
A
4
A
4
SUP
port
8.5
JIS symbol
2
B
A
4
8.5
Note 1) The dual 3 port valve is
not available.
Note 2) When the internal pilot
type and external pilot
type of valves are mixed
up on the manifold, or-
der the manifold suit-
able for the specifica-
tions of the external pi-
lot valve.
Note 3) Valves with the external
pilot have a pilot EXH
with individual exhaust
specifications and EXH
can be pressurized.
However, the pressure
supplied from EXH
should be 0.4 MPa or
lower.
Spacer for
SUP
Individual
Valve
Valve
EXH
BA
PR
BA
Advertisement
Table of Contents
