1. Manuals
  2. Brands
  3. SMC Networks Manuals
  4. Control Unit
  5. S0700
  6. Manual

SMC Networks S0700 Series Manual

7 mm width compact pilot type 5 port solenoid valve
Hide thumbs Also See for S0700 Series:
Table of Contents

Advertisement

Quick Links

Download this manual
7 mm Width Compact Pilot Type 5 Port Solenoid Valve
Rubber Seal
7
7 7
m m
t h :
W i d
S0700
Series
F l o w
d m
[
0 . 3 9
C
0 . 3 9
0 . 1 1
b :
0 . 1 1
C v :
e r i s
r a c t
C h a
)
· b a r
/ ( s
3
t i c s
0 . 3 9
0 . 3 9
] :
609
SJ
SY
SV
SYJ
SZ
VP4
S0700
VQ
VQ4
VQ5
VQC
VQZ
SQ
VFS
VFR
VQ7

Advertisement

Table of Contents
loading

Related Manuals for SMC Networks S0700 Series

Summary of Contents for SMC Networks S0700 Series

  • Page 1 7 mm Width Compact Pilot Type 5 Port Solenoid Valve S0700 Series Rubber Seal t i c s 0 . 3 9 0 . 3 9 e r i s r a c t t h : W i d C h a ·...
  • Page 2 7 mm Width Compact Pilot Type 5 Port Solenoid Valve 7 mm Width Compact Pilot Type 5 Port Solenoid Valve S0700 Series Compact Design with High Flow Capacity Compact Design with High Flow Capacity Flow characteristics Note 2) Response Type of Series Model 1 4/2 (P A/B)
  • Page 3 Many Combinations Available to Fit Your Needs Many Combinations Available to Fit Your Needs Serial D-sub Flat Ribbon PC Wiring System Transmission Connector Cable Compatible Flat Ribbon Cable EX500 EX510 EX250 Terminal Lead Wire Circular Lead Wire Connector Block Applicable to Serial Wiring Applicable to Serial Wiring 2 Types of Manifold 2 Types of Manifold...
  • Page 4 S Kit F Kit Serial Transmission D-sub Connector EX500 EX510 EX250 Gateway System Gateway System Integrated Type (For I/O) MIL standard Serial Transmission System Serial Transmission System Serial Transmission System Applicable network Applicable network Applicable network · DeviceNet · DeviceNet ·...
  • Page 5 P Kit J Kit T Kit L Kit M Kit C Kit Flat Ribbon Cable PC Wiring System Compatible Terminal Block Lead Wire Circular Connector Lead Wire Flat Ribbon Cable MIL standard MIL standard · 20 pins · 26 pins, 20 pins Page 628 Page 632 Page 636...

  • Page 6: Valve Specifications

    Valve Specifications Valve Specifications Model Flow characteristics Note 2) Type of Mass Response Model 1→4/2 (P→A/B) 4/2→5/3 (A/B→R1/R2) Series actuation time (msec) C[dm /(s·bar)] C[dm /(s·bar)] Single S0710 0.39 0.39 0.11 0.37 0.39 0.10 18 or less 2 position Plug-in type Double S0720 0.39...
  • Page 7 Manifold Specifications Manifold Specifications Model Port specification Note 1) Note 3) Note 3) Applicable 5-station Addition Port size Type of connection Base model stations mass (g) per/station (g) 1(P), 3(R) 4(A), 2(B) S kit: Serial transmission Max. 16 stations (EX500) Note 2) Note 4) S kit: Serial transmission...
  • Page 8 S0700 Series Cylinder Speed Chart Use as a guide for selection. Please confirm the actual conditions with Base Mounted SMC Sizing Program. Bore size Series CJ2 Series CM2 Pressure 0.5 MPa Pressure 0.5 MPa Average Series Load factor 50% Load factor 50% speed Stroke 60 mm Stroke 300 mm...

  • Page 9: Serial Transmission

    Plug-in Serial Transmission S Kit Stacking Base Gateway System Serial Transmission System P.618 EX500 S0700 Integrated Type (For I/O) Serial Transmission System P.620 EX250...
  • Page 10 S0700 Kit (Serial Transmission) EX500 Gateway System Serial Transmission System How to Order Manifold SS0750 08 C4 SDA2 Stations Option Stations Symbol Stations Symbol 1 station None Note 2) With back pressure check valve (all stations) Note) With DIN rail (Rail length: Standard) 16 stations Without DIN rail (with bracket) Note) The maximum number of stations will be dif-...
  • Page 11 S0700 Plug-in EX500 Gateway System Serial Transmission System SS0750 S Kit (Serial transmission: EX500) 5.25 (n-1) x 8.5 12.8 (12) Indicator light Manual override S0700 EX500 series SI unit Mounting hole for 4 x M4 D side U side Stations 3(R) port Communication connector Communication connector...
  • Page 12 S0700 Kit (Serial Transmission) EX250 Integrated Type (For I/O) Serial Transmission System How to Order Manifold SS0750 08 C4 Stations Input block Input block COM (for I/O unit only) (for I/O unit only) Stations Symbol Specification Symbol Specification Symbol 1 station SI unit/Input block: None (SD0) PNP sensor input (+COM) or without input block Input block: None...
  • Page 13 S0700 Plug-in EX250 Integrated Type (For I/O) Serial Transmission System 5.25 (n-1) x 8.5 12.8 (12) Indicator light Manual override S0700 Mounting hole for 4 x M4 Mounting hole for 2 x M4 Input block SI unit D side U side Stations 3(R) port Input connector...

  • Page 15: D-Sub Connector

    Plug-in D-sub Connector F Kit MIL Standard S0700 25 pins Cable length 1.5 m P.624 Connector entry direc- tion can be changed from the top to the side, and vice versa.

  • Page 16: Cable Assembly

    S0700 Kit (D-sub Connector) b The D-sub connector reduces installation labor for electrical con- nections. b Using the D-sub connector (25P), conforming to MIL standard permits the use of connectors put on the market and gives a wide interchangeability. b Top or side receptacle position can be selected in accordance with the available mounting space.
  • Page 17 S0700 Plug-in How to Order Manifold SS0750 08 C4 Stations Option Symbol Stations Symbol Option 2 stations None Note) With back pressure check valve 24 stations Note 2) (all stations) Note) The maximum number of stations With DIN rail (Rail length: Standard) will be different depending on the Without DIN rail (with bracket) wiring specification.
  • Page 18 S0700 Kit (D-sub Connector) 5.25 47.1 12.8 (n-1) x 8.5 (12) Indicator light Manual override Release for switching Applicable connector: connector direction D-sub connector (25P) Mounting hole for 4 x M4 (Conforming to MIL-C-24308) D side U side Stations 3(R) port C8: ø8 (For A, B port metric size) N9: ø5/16"...

  • Page 19: Flat Ribbon Cable

    Plug-in Flat Ribbon Cable P Kit MIL Standard S0700 26 pins, 20 pins Cable length P.628 1.5 m Connector entry direc- tion can be changed from the top to the side, and vice versa.
  • Page 20 S0700 Kit (Flat Ribbon Cable) b Flat ribbon cable connector reduces installation labor for elec- trical connection. b Using the connector for flat ribbon cable (26P, 20P) conform- ing to MIL standard permits the use of connectors put on the market and gives a wide interchangeability.
  • Page 21 S0700 Plug-in How to Order Manifold SS0750 08 C4 Stations Option Symbol Stations Symbol Option 2 stations None With back pressure check valve Note) 24 stations Note 2) (all stations) Note) The maximum number of stations With DIN rail (Rail length: Standard) will be different depending on the Without DIN rail (with bracket) wiring specification.
  • Page 22 S0700 Kit (Flat Ribbon Cable) 5.25 47.1 (n-1) x 8.5 12.8 (12) Indicator light Manual override Release for switching Applicable connector: Mounting hole for 4 x M4 connector direction Flat ribbon cable connector (26P) (Conforming to MIL-C-83503) D side U side Stations 3(R) port C8: ø8 (For A, B port metric size)
  • Page 23 Plug-in PC Wiring System Compatible Flat Ribbon Cable J Kit S0700 MIL Standard 20 pins P.632 PC Wiring System compatible 20 pins...
  • Page 24 S0700 Kit (PC Wiring System Compatible Flat Ribbon Cable) b Compatible with PC wiring system. b Using connector for flat ribbon cable (20P) conforming to MIL standard permits the use of connectors put on the market and gives a wide interchangeability. b Top or side receptacle position can be selected in accordance with the available mounting space.
  • Page 25 S0700 Plug-in How to Order Manifold SS0750 08 C4 Stations Option Symbol Stations Symbol Option 2 stations None Note) With back pressure check valve 16 stations Note 2) (all stations) Note) The maximum number of stations With DIN rail (Rail length: Standard) will be different depending on the Without DIN rail (with bracket) wiring specification.
  • Page 26 S0700 Kit (PC Wiring System Compatible Flat Ribbon Cable) 5.25 47.1 (n-1) x 8.5 12.8 (12) Indicator light Manual override Applicable connector: Release for switching Mounting hole for 4 x M4 connector direction Flat ribbon cable connector (20P) (Conforming to MIL-C-83503) D side U side Stations...

  • Page 27: Terminal Block

    Plug-in Terminal Block T Kit S0700 With Terminal Block P.636...

  • Page 28: Terminal Block Connection

    S0700 Kit (Terminal Block) b This kit has a small terminal box inside a junction box. The electrical entry port {G 3/4} permits connec- tion of conduit fittings. Terminal Block Connection Step 1. How to remove terminal block cover Step 2. The diagram below shows the terminal block wiring schematic.
  • Page 29 S0700 Plug-in How to Order Manifold SS0750 08 C4 Stations Option Symbol Option Symbol Stations 1 station None Note 2) With back pressure check valve (all stations) Note) 20 stations With DIN rail (Rail length: Standard) Without DIN rail (with bracket) Note) The maximum number of stations will be different D „...
  • Page 30 S0700 Kit (Terminal Block) 5.25 99.6 (n-1) x 8.5 12.8 (12) Indicator light Manual override Mounting hole for 4 x M4 D side U side Stations 2 x G 3/4 3(R) port Conduit port C8: ø8 (For A, B port metric size) N9: ø5/16"...
  • Page 31 Plug-in Lead Wire L Kit S0700 Lead Wire Direct Entry Type P.640...
  • Page 32 S0700 Kit (Lead Wire) b Direct electrical entry type Electrical Wiring Specifications Wiring specifications Lead wire length Lead wire SS0750 08 C4 LD 0 0.3 mm x 25 cores As the standard electrical wiring specifica- tions, double wiring (connected to SOL. A Lead wire length and SOL.
  • Page 33 S0700 Plug-in How to Order Manifold SS0750 08 C4 Stations Option Symbol Stations Symbol Option 2 stations None Note) With back pressure check valve 24 stations Note 2) (all stations) Note) The maximum number of stations With DIN rail (Rail length: Standard) will be different depending on the wiring specification.
  • Page 34 S0700 Kit (Lead Wire) 5.25 47.1 12.8 (n-1) x 8.5 (12) Indicator light Manual override Mounting hole for 4 x M4 D side U side Stations 3(R) port C8: ø8 (For A, B port metric size) N9: ø5/16" (For A, B port inch size) DIN rail clamp screw 17.2 2n x C2, C3, C4, N1, N3 (4(A), 2(B) port)

  • Page 35: Circular Connector

    Plug-in Circular Connector M Kit S0700 Circular Connector 26 Pins P.644...
  • Page 36 S0700 Kit (Circular Connector) b Simplification and labor savings for wiring work can be achieved by using a circular connector for the electrical connection. Electrical Wiring Specifications Cable Assembly Circular Connector AXT100-MC26- Double wiring (connected to SOL. A and SOL. B) is adopted for the internal wiring Circular connector assembly (26P type) included in a specific manifold of each station, regardless of valve and model no.
  • Page 37 S0700 Plug-in How to Order Manifold SS0750 08 C4 Stations Option Symbol Stations Symbol Option 2 stations None Note 2) With back pressure check valve (all stations) Note) 24 stations With DIN rail (Rail length: Standard) Without DIN rail (with bracket) Note) The maximum number of stations will be dif- D „...
  • Page 38 S0700 Kit (Circular Connector) 5.25 47.1 (n-1) x 8.5 12.8 (12) Indicator light Manual override Mounting hole for 4 x M4 D side U side Stations Circular connector cable assembly 3(R) port AXT100-MC26-015: 1.5 m C8: ø8 (For A, B port metric size) AXT100-MC26-030: 3 m N9: ø5/16"...
  • Page 39 S0700...
  • Page 40 S0700 Series Plug-in Manifold Optional Parts Blanking plate JIS symbol SS0700-10A-1 It is used by attaching on the manifold block for being prepared for removing a valve for maintenance reasons or planning to mount a spare valve, etc. Mass: 25 g External pilot [-R] This can be used when the air pressure is 0.1 to 0.2 MPa lower than the minimum operating pres-...
  • Page 41 S0700 Plug-in SUP block plate SS0700-B-P When different pressures, high and low, are supplied to one manifold, a SUP block plate is inserted between the stations under differ- ent pressures. ∗ Specify the number of stations on the U side manifold specification sheet.
  • Page 42 S0700 Series Plug-in Manifold Optional Parts JIS symbol Blanking plate with output SS0700 1C Connector on the power supply side is not attached. Lead wire length (mm) 2000 Blanking plate with output 1000 2500 1500 3000 Blanking plate with a connector for individually outputting electricity to drive a single valve or equipment that are not on the manifold base.
  • Page 43 S0700 Plug-in Applicable to DIN rail mounting Each manifold can be mounted on a DIN rail. Order it by indicating a manifold mounting symbol for DIN rail mounting style, -D. Standard DIN rail which is approx. 30 mm longer than the manifold with the specified number of stations is attached. The following options are also available.
  • Page 44 S0700 Series Plug-in Manifold Optional Parts <Check Valve Double check block (Separated) Working Principle> VQ1000-FPG- „„ It is used on the outlet side piping to keep the cylinder in the intermediate position for a long time. Combining the double Cylinder side check block with a built-in pilot type double check valve and a 2 position single/double solenoid valve will permit this block to be used for preventing the dropping at the cylinder stroke end...
  • Page 45 S0700 Series Plug-in Construction Single: S0710 S0710 (R1) (R2) (R1) (R2) Double: S0720 S0700 S0720 (R1) (R2) (R1) (R2) Dual 3 Port: S07B0 S07A0 (R1) (R2) N.C. + N.C. S07B0 (R1) (R2) (R1) (R2) Component Parts N.O. + N.O. Part no. Material Body S07C0...
  • Page 46 Multi-kit Plug-in Type Manifold Exploded View Housing assembly and SI unit D side end plate assembly Manifold block assembly U side end plate assembly...
  • Page 47 S0700 Plug-in Manifold Assembly Part No. <Housing Assembly and SI Unit, Input Block> Description Part no. Note EX500-Q001 DeviceNet/PROFIBUS DP/CC-Link, EtherNet/IP (+COM.) SI unit EX500-Q101 DeviceNet/PROFIBUS DP/CC-Link, EtherNet/IP (–COM.) EX250-SDN1 DeviceNet (–COM.) EX250-SPR1 PROFIBUS-DP (–COM.) EX250-SMJ2 CC-Link (+COM.) EX250-SAS3 AS-Interface 31SLAVE 8 IN/8 OUT 2 power supply systems (–COM.) EX250-SAS5 AS-Interface 31SLAVE 4 IN/4 OUT 2 power supply systems (–COM.) SI unit...
  • Page 48 S0700 Series How to Add Manifold Stations (Plug-in Type / Lead Wire Connection Type) What to order Manifold block assembly (Refer to page 655.) Steps for adding stations Hexagon socket head screw Loosen hexagon bolts from the end plate at the U side and remove the Tightening torque: 0.85 to 0.95 N m end plate.
  • Page 49 Plug Lead Lead Wire C Kit S0700 With barb fittings With one-touch fittings Individual Connector P.658...
  • Page 50 S0700 Kit (Lead Wire) How to Order Manifold SS0755 08 C4 Plug lead Option Symbol Option None Note) External pilot Stations Note) For details, refer to page 664. Symbol Stations ∗ For manifold optional parts, refer to 2 stations pages 664 to 666. 20 stations Connector kit Cylinder port size...
  • Page 51 S0700 Plug Lead ≅ 300 SS0755- „ 48.5 C „ N „ (Lead wire length) (4.5) (n-1) x 8.5 12.7 M3 x 0.5 External pilot port Manual For external pilot specification override 2 x Rc 1/8 3(R) port Mounting hole for 2 x ø4.5 2 x Rc 1/8 1(P) port...
  • Page 53 Plug Lead Serial Transmission S Kit S0700 Gateway System Serial Transmission System EX510 Connect all wiring using connectors. P.662...
  • Page 54 S0700 Kit (Serial Transmission System) EX510 Gateway System Serial Transmission System How to Order Manifold SS0755 08 C4 Option Option Symbol S kit None EX510 serial wiring Special wiring specification Note 2) (Except double wiring) Note 3) External pilot Note 1) When two or more options are specified, indicate them alphabetically.
  • Page 55 S0700 Plug Lead EX510 Gateway System Serial Transmission System ≅ 300 48.5 (Lead wire length) SI unit EX510-S001 39.7 Grommet (4.5) S0700 (n-1) x 8.5 19.8 2 x Rc 1/8 13.7 12.7 3(R) port Indicator light Manual override M3 x 0.5 External pilot port For external pilot specification Mounting hole for 2 x ø4.5...
  • Page 56 S0700 Series Plug Lead Manifold Optional Parts Blanking plate assembly SS0700-10A-5 It is used by attaching on the manifold block for being prepared for removing a valve for maintenance reasons or planning to mount a spare valve, etc. Mass: 21 g Individual SUP spacer SS0700-P-5-M5 Port size...
  • Page 57 S0700 Series Plug Lead EX510 Gateway System Serial Transmission System Double check block (Separated) <Check Valve Working Principle> VQ1000-FPG- „„ It is used on the outlet side piping to keep the cylinder in the Cylinder side pressure intermediate position for a long time. Combining the double check block with a built-in pilot type double check valve and a 2 position single/double solenoid valve will permit this block to be used for preventing the dropping at the cylinder stroke end when the SUP...
  • Page 58 S0700 Series Plug Lead Manifold Optional Parts Blanking plug KJP-02 Dimensions (mm) KQ2P-04 Applicable Mass fitting size Model ø KJP-02 KQ2P-23 31.5 KQ2P-04 KQ2P-06 Silencer (For manifold EXH port) AN110-01 Silencer is installed in the EXH port.

  • Page 59: Single Unit

    5 Port Solenoid Valve/Base Mounted Plug Lead S0700 Single Unit How to Order Valves S07 1 With / Without sub-plate Symbol Specification Without sub-plate With sub-plate Type of actuation S0700 Symbol Specification Electrical entry 2 position single Symbol Specification Shape 2 position double 4 position dual 3 port type (N.C.
  • Page 60 S0700 Series Dimensions 2 Position Single Grommet (G): S0715(R)- „ G-M5 21.2 M5 x 0.8 1(P) port 11.4 M5 x 0.8 3(R) port Manual override 2 x ø3.5 21.4 mounting hole 50.3 48.2 Indicator light M5 x 0.8 2(B) port With plug connector / light (C) S0715(R)- „...
  • Page 61 S0700 Series Plug Lead Construction: Main Parts / Replacement Parts 2 Position Single S0715 (R1) (R2) (R1) (R2) 2 Position Double S0700 S0725 (R1) (R2) (R1) (R2) S07A5 4 Position Dual 3 Port Valve (R1) (R2) N.C. + N.C. S07B5 (R1) (R2) N.O.

  • Page 62: Replacement Parts

    S0700 Series Plug Lead Type Replacement Parts <One-touch Fitting Assembly (For Cylinder Port)> Manifold pitch Port size Part no. VVQ0000-50A-C2 One-touch fitting for ø2 VVQ0000-50A-C3 One-touch fitting for ø3.2 VVQ0000-50A-C4 One-touch fitting for ø4 VVQ0000-50A-N1 One-touch fitting for ø1/8" VVQ0000-50A-N3 One-touch fitting for ø5/32"...

  • Page 63: Specific Product Precautions

    S0700 Series Specific Product Precautions 1 Be sure to read before handling. Refer to front matters 58 and 59 for Safety Instructions and pages 3 to 7 for 3/4/5 Port Solenoid Valve Precautions. Manual Override Mounting of Valves Warning Caution Tighten the bolts firmly to stop the gasket from com- The manual override is used for switching the main valve.
  • Page 64 S0700 Series Specific Product Precautions 2 Be sure to read before handling. Refer to front matters 58 and 59 for Safety Instructions and pages 3 to 7 for 3/4/5 Port Solenoid Valve Precautions. Mounting/Removing from the DIN Rail How to Change Connector Entry Direction Caution Caution <Plug-in type only>...
  • Page 65 S0700 Series Specific Product Precautions 3 Be sure to read before handling. Refer to front matters 58 and 59 for Safety Instructions and pages 3 to 7 for 3/4/5 Port Solenoid Valve Precautions. Replacement of Cylinder Port Fittings Internal Wiring Specifications Warning Caution The cylinder port fittings are a cassette for easy re-...
  • Page 66 S0700 Series Specific Product Precautions 4 Be sure to read before handling. Refer to front matters 58 and 59 for Safety Instructions and pages 3 to 7 for 3/4/5 Port Solenoid Valve Precautions. Intrusion of the Surge Voltage Connection of Tubing Caution Caution The surge voltage created when the power supply is...
  • Page 67 S0700 Series Specific Product Precautions 5 Be sure to read before handling. Refer to front matters 58 and 59 for Safety Instructions and pages 3 to 7 for 3/4/5 Port Solenoid Valve Precautions. Serial Wiring EX500/EX250 Precautions Warning Caution 10. Provide adequate protection when operating in loca- 1.
  • Page 68 S0700 Series Specific Product Precautions 6 Be sure to read before handling. Refer to front matters 58 and 59 for Safety Instructions and pages 3 to 7 for 3/4/5 Port Solenoid Valve Precautions. Serial Wiring EX500/EX250 Precautions Safety Instructions for Cable Caution 1.
  • Page 69 S0700 Series Specific Product Precautions 7 Be sure to read before handling. Refer to front matters 58 and 59 for Safety Instructions and pages 3 to 7 for 3/4/5 Port Solenoid Valve Precautions. Serial Wiring EX510 Precautions Mounting Operating Environment Caution Warning 1.

  • Page 70: Adjustment And Operation

    S0700 Series Specific Product Precautions 8 Be sure to read before handling. Refer to front matters 58 and 59 for Safety Instructions and pages 3 to 7 for 3/4/5 Port Solenoid Valve Precautions. Serial Wiring EX510 Precautions Adjustment and Operation Warning 1.

  • Page 71: Troubleshooting

    Troubleshooting 1 In the event of product failure, take remedial Trouble measures by checking the following items as Cause Measures detailed below . 1) Slide failure or sticking of the • Replace the valve. Replace the Does the product main valve valve.
  • Page 72 Troubleshooting 2 In the event of product failure, take remedial Trouble measures by checking the following items as Cause Measures detailed below . 1-1) The clamp screw of mounting Tighten the clamp screw. bolt is loose. Appropriate tightening torque Check the part where the air is leaking. 0.17 to 0.23 N m Replace the gasket if it was dam- 1.

This manual is also suitable for:

S0710S0720S07a0S07b0S07c0S0715 ... Show all

Table of Contents