Table of Contents
Advertisement
S0700
Series
Manifold Optional Parts
Blanking plate assembly
SS0700-10A-5
It is used by attaching on the manifold block for being prepared for removing a
valve for maintenance reasons or planning to mount a spare valve, etc.
Mass: 21 g
Individual SUP spacer
SS0700-P-5-M5
Port size
M5
M5 thread
Mounted on the manifold block to make an independent supply port when each
solenoid valve uses different operating pressure.
Mass: 7 g
*Compatible with 8.5 mm pitch manifold only.
Individual EXH spacer
SS0700-R-5-M5
Port size
M5
M5 thread
Mounted on the manifold block to make an independent exhaust port when the
exhaust from one valve affects valves on other stations in the air circuit.
Mass: 7 g
*Compatible with 8.5 mm pitch manifold only.
Port plug
VVQ0000-CP
The plug is used to block the cylinder port when using a 5 port valve as a 3 port
valve.
∗ When ordering a plug incorporated with a manifold, indicate "CM" for the port
size in the manifold no., as well as, the mounting position and number of
stations and cylinder port mounting positions, A and B, by means of the
manifold specification sheet.
External pilot [-R]
This can be used when the air pressure is 0.1 to 0.2 MPa lower than the mini-
mum operating pressure of the solenoid valves or used for vacuum specifica-
tions.
Add R to the part numbers of manifolds and valves to indicate the external pilot
specification.
An M5 port will be installed on the top side of the manifold's SUP/EXH block.
b How to Order Valves (Example)
S0715 R -5G
External pilot
b How to Order Manifold (Example)
∗ Indicate R for an option.
SS0755-08C4C-R
External pilot
664
Plug Lead
External pilot port
(M3 x 0.5)
Note 1) The dual 3 port valve is not available.
Note 2) When the internal pilot type and external pilot type of
valves are mixed up on the manifold, order the manifold
suitable for the specifications of the external pilot valve.
Note 3) Valves with the external pilot have a pilot EXH with
individual exhaust specifications and EXH can be
pressurized.
However, the pressure supplied from EXH should be
0.4 MPa or lower.
2
B
4
A
7.4
M5 x 0.8
P
2
B
4
A
8.3
M5 x 0.8
R
2
B
4
A
8.3
11.6
O-ring
Port plug
Advertisement
Table of Contents
