Related Manuals for SMC Networks SX3000 Series
Summary of Contents for SMC Networks SX3000 Series
- Page 1 Doc. no. SX3000-OMM0002-B PRODUCT NAME 5 Port Solenoid Valve MODEL / Series / Product Number SX3000/5000/7000 Series...
-
Page 2: Table Of Contents
Contents Safety Instructions ----------------------------------------------------------------------- 2,3 Precautions on Design / Selection ------------------------------------------------------- 4,5 Mounting ---------------------------------------------------------------------------------------- 6 Piping -------------------------------------------------------------------------------------------- 6 Wiring -------------------------------------------------------------------------------------------- 6 Lubrication -------------------------------------------------------------------------------------- 7 Air Supply --------------------------------------------------------------------------------------- 7 Operating Environment ---------------------------------------------------------------------- 7 Maintenance ------------------------------------------------------------------------------------ 8 Specific Product Precautions --------------------------------------------------------------- 9 to 11 Valve Construction ---------------------------------------------------------------------------- 12,13 Troubleshooting -------------------------------------------------------------------------------- 14,15 SX3000-OMM0002-B... -
Page 3: Safety Instructions
Safety Instructions These safety instructions are intended to prevent hazardous situations and/or equipment damage. These instructions indicate the level of potential hazard with the labels of “Caution,” “Warning” or “Danger.” They are all important notes for safety and must be followed in addition to International Standards (ISO/IEC) , and other safety regulations. - Page 4 Safety Instructions Caution 1.The product is provided for use in manufacturing industries. The product herein described is basically provided for peaceful use in manufacturing industries. If considering using the product in other industries, consult SMC beforehand and exchange specifications or a contract if necessary. If anything is unclear, contact your nearest sales branch.
-
Page 5: Precautions On Design / Selection
SX3000/5000/7000 Series Precautions for 5 Port Solenoid Valve 1 Be sure to read before handling. Design / Selection 9. Regarding a vacuum switch valve and a vacuum Warning release valve If a non-vacuum valve is installed in the middle of piping system 1. - Page 6 SX3000/5000/7000 Series Precautions for 5 Port Solenoid Valve 2 Be sure to read before handling. Design / Selection Caution 3. Surge voltage suppressor 1) The surge voltage suppressor built into the valve is intended to protect the output contacts so that the surge generated inside valve does not adversely affect the output contacts.
-
Page 7: Mounting
SX3000/5000/7000 Series Precautions for 5 Port Solenoid Valve 3 Be sure to read before handling. Mounting (2) When using a fitting other than an SMC fitting, follow the Warning instructions given by the fitting manufacturer. Operation manual 2) Rc Install the products and operate them only after reading the Tighten with the proper torque shown below. -
Page 8: Lubrication
SX3000/5000/7000 Series Precautions for 5 Port Solenoid Valve 4 Be sure to read before handling. Lubrication Take measures to ensure air quality, such as by installing an aftercooler, air dryer, or water Warning separator. 1. Lubrication Compressed air that contains a large amount of drainage can 1) The valve has been lubricated for life by the factory and does cause malfunction of pneumatic equipment such as valves. -
Page 9: Maintenance
SX3000/5000/7000 Series Precautions for 5 Port Solenoid Valve 5 Be sure to read before handling. Maintenance Warning 1. Perform maintenance and inspection according to the procedures indicated in the operation manual. If handled improperly, human injury and/or malfunction or damage of machinery and equipment may occur. 2. - Page 10 SX3000/5000/7000 Series Specific Product Precautions 1 Be sure to read before handling. Manual Override Operation When Using a 5 Port Valve as a 3 Port Valve Warning Caution ￭ When using a 5 port valve as a 3 port valve Handle carefully, as connected equipment can be actuated through manual override operation.
- Page 11 SX3000/5000/7000 Series Specific Product Precautions 2 Be sure to read before handling. 3. Attaching and detaching lead wires with sockets - Attaching Insert the sockets into the square holes of the connector (with +,- indication), and continue to push the sockets all the way in until the lock by hooking into the seats in the connector.
-
Page 12: Specific Product Precautions 3
SX3000/5000/7000 Series Specific Product Precautions 3 Be sure to read before handling. Connect so that polarity is matched to the connector’s (+), (-) and One-touch Fittings A, B and COM indicators, In the case of voltage specifications Caution other than 12 or 24 VDC, take care to avoid mistaking polarity, as there is no diode to prevent reverse current. -
Page 13: Valve Construction
-12-- SX3000-OMM0002-B... - Page 14 -13- SX3000-OMM0002-B...
-
Page 15: Troubleshooting
TROUBLESHOOTING Should any trouble be found during operation, trace the source of the trouble in the following order and take corrective action. Trouble phenomenon Cause expected Measures ① Faulty operation Pilot valve is not operated Fall of power supply voltage. ②... - Page 16 Remedy Remedy ① Regulate voltage, so that the voltage at the time of the operation becomes specifications range. ② Re-wire correctly. ③ Replace part. ④ Replace part or re-wire positively. ⑤ Replace valve. ⑥ Regulate pressure so that pilot pressure will fall within operating pressure range furing operation. ･If wrong oil is used, completely air blow to remove oil, and replace valve.
- Page 17 Revision ＢRENEWAL 2018.8 4-14-1, Sotokanda, Chiyoda-ku, Tokyo 101-0021 JAPAN Tel: + 81 3 5207 8249 Fax: +81 3 5298 5362 http://www.smcworld.com Note: Specifications are subject to change without prior notice and any obligation on the part of the manufacturer. © 2018 SMC Corporation All Rights Reserved SX3000-OMM0002-B...
Need help?
Do you have a question about the SX3000 Series and is the answer not in the manual?
Questions and answers