Table of Contents
Advertisement
4.0 System Connectivity
The following lists the hardware and software products required for using the SKP16C62P
StarterKit Plus.
•
•
•
•
•
•
Figure 4-1 shows the system connectivity for the SKP16C62P.
4.1 Host Computer Requirements
The minimum requirement to be able to use the software that comes with the SKP16C62P is a
PC with a USB port and Microsoft Windows 98, ME, 2000, or XP.
Note: For Windows 95 and NT, that do not support USB, please contact Renesas representative
or email
4.2 SKP16C62P Board
The SKP16C62P board provides an evaluation and development environment for the M16C/62P
group of MCU. It has pushbutton switches, LED's and LCD for user interface. Standard connector
ports are available to expand the range of applications through the use of expansion boards, etc.
4.3 ICD (RTA-FoUSB-MON)
The ICD provides a plug-and-play debugging and programming interface to the SKP16C62P
board by using the host computer's Universal Serial Bus (USB). The USB port also provides
power to the SKP16C62P board and ICD thereby eliminating the need for an external power
supply.
SKP16C62P User's Manual Rev. 1.0
Downloaded from
Elcodis.com
electronic components distributor
Host Computer (supplied by user)
SKP16C62P Board
RTA-FoUSB-MON (ICD)
Mini USB Cable
Target Cable
Software Tools (HEW IDE, NC30 Compiler/Linker, KD30 Debugger, FoUSB
Programmer)
Figure 4-1 SKP16C62P System Connectivity
techsupport.rta@renesas.com
for options.
5 / 22
Applications Engineering
December 2003
Advertisement
Table of Contents
