Installing Required Files Manually - Renesas SKP16C62P User Manual

A.3 Installing Required Files Manually
This section discusses how to install the SKP16C62P software and development tools manually
(i.e. when not using the SKP16C62P installer).
(1) Run the KD30 installer, 'KD30V320R1b_e.exe', from the \Tools\KD30 folder on the SKP
(2) Run the FoUSB installer, 'fousb_V2.00.exe', from the \Tools\FoUSB folder on the SKP
(3) Run the HEW installer, 'setup.exe', from the \Tools\HEW folder on the SKP CD.
(4) Run the NC30 installer, 'nc30wa_entry.exe', from the \Tools\NC30WA folder on the SKP
(5) Create an SKP16C62P folder under C:\MTOOL on your PC and then copy the directories
This completes the software installation but the drivers for the ICD also needs to be installed. We
need to copy driver files (inf and sys) files and executables to certain Windows directories.
Open up the Windows Explorer window and browse the C: directory. One of the directories is
C:\MTOOL\FoUSB\USB Drivers, which contains the driver files necessary to use the ICD. Plug
the ICD board to your PC using the enclosed mini USB cable.
Follow the instructions on installing new hardware and when Windows asks for the drivers or
location of the drivers, select browse or specify C:\MTOOL\FoUSB\USB Drivers, and then
continue with the new hardware installation.
NOTE: If you are using Windows 2000, you need Administrator privileges to install the
drivers.
If you still encountering problems on installing the drivers, you can try the following.
SKP16C62P User's Manual Rev. 1.0
Downloaded from Elcodis.com electronic components distributor
CD.
CD.
CD.
from the \SKP16C62P\files folder on the SKP CD to this folder.
(1) Windows 2000
i. Copy the fousb.inf and usbmon.inf files from \USB Drivers folder to
\WINNT\INF folder.
ii. Copy the fousb.sys and usbmon.sys files from \USB Drivers folder to
\WINNT\SYSTEM32\drivers folder.
(2) Windows 98
i. Copy the fousb.inf and usbmon.inf files from C:\MTOOL\FoUSB\USB Drivers
folder to \WINDOWS\INF folder.
ii. Copy the fousb.sys and usbmon.sys files from C:\MTOOL\FoUSB\USB
Drivers folder to WINDOWS\SYSTEM32\drivers folder.
18 / 22
Applications Engineering
December 2003