Table of Contents
Advertisement
Applications Engineering
1.0 Introduction
The SKP16C62P StarterKit Plus (SKP) is a low-cost environment for evaluating M16C/62P group
of microcontrollers (MCU) and Renesas Technology America, Inc. software development tools.
The kit comes with an integrated software development environment, HEW (IDE, C-compiler,
assembler, and linker), KD30 Debugger, and FoUSB (Flash-over-USB™) Programmer.
A real-time, source-level debug environment is implemented using the KD30 debugging software
TM
with the RTA-FoUSB-MON Flash Programmer/In-Circuit Debugger (ICD). The Flash-over-USB
(FoUSB) Programmer software, with the ICD, allows in-system programming of the M16C/62P
flash MCU.
The ICD and firmware provide a convenient USB (Universal Serial Bus) interface between the
SKP16C62P board and the host PC. This interface reduces resource requirements on the
M16C/62P MCU, allows faster code downloads and, can also be used with many other Renesas
Flash MCU's, SKP's, and user's target board.
SKP16C62P User's Manual Rev. 1.0
2 / 22
December 2003
Downloaded from
Elcodis.com
electronic components distributor
Advertisement
Table of Contents
