Getting Started - Elcometer Novo-Gloss 406 Operating Instructions Manual

2 GETTING STARTED

2.1 FITTING BATTERIES
The Elcometer 406 uses dry cell batteries only. Sealed alkaline batteries are recommended.
4 x LR6 (AA) alkaline batteries are supplied in the kit.
To fit or replace the batteries:
1. Locate the two Posi-Drive screws which retain the battery compartment cover at the rear of the
Glossmeter (Figure 3).
2. Use the screwdriver supplied to remove the screws and then lift off the battery compartment cover.
Figure 3. Battery compartment and Battery Polarity
5