Elcometer Novo-Gloss 406 Operating Instructions Manual page 22

6.4 MANUAL CALIBRATION MODE
MANUAL CALIBRATION MODE - 60° ANGLE
The manual calibration procedure is as follows:
1. Press the POWER button to switch the gauge on.
The display will show the following screen for 2 seconds:
The display will then revert to measurement mode.
2. Use the SCROLL UP/DOWN button to select:
3. Press the READ/SELECT button to start the procedure.
20
Elcometer 406
Mini Glossmeter
ANGLE Value No.
60° 0 0
TO CALIBRATE
Press Read Key
ARE YOU SURE?
Press Read Key