Getting Started - Elcometer Elcomotor 312 Operating Instructions Manual

R

2 GETTING STARTED

2.1 FITTING BATTERIES
The Elcometer 311 may be used with dry cell batteries or rechargeable batteries.
2 x LR03 (AAA) alkaline batteries are supplied with the gauge.
To fit or replace batteries:
1. Locate battery compartment cover at rear of gauge.
2. Lift off battery compartment cover.
3. Place batteries in the battery clips ensuring correct polarity.
4. Replace battery compartment cover.
Note: Remove the batteries from the gauge if it is to remain unused
for a long period of time. This will prevent damage to the gauge in
the event of malfunction of the batteries.
2.2 LOW BATTERY VOLTAGE
When the battery voltage is low the battery symbol illuminates on
the display. The gauge will still function but new batteries are
recommended.
When the battery symbol flashes the batteries must be replaced.
4