Elcometer Novo-Gloss 406 Operating Instructions Manual page 14

4.2 Deleting all readings
1. Press the SCROLL UP/DOWN key until the following message is displayed:
2. Press the READ/SELECT key for more than 2 seconds, the gauge will prompt:
3. Press the READ/SELECT key to delete all values. Pressing any other key will exit the Delete mode.
Note: Stored data can also be cleared from the gauge using the Delete Data function in Novo-Soft™ when
the gauge is connected to the PC. See "Novo-Soft™ software" on page 26.
12
Delete Sample
60° 94.2 10
Del All Results?
Are You Sure?
Press Read Key