Getting Started - Elcometer 456 Operating Instructions Manual

R

2 GETTING STARTED

Before you use your gauge for the first time, remove the paper strip from the battery compartment.
2.1 FIT PROBE
Align probe connector keyway with the socket on the base of the gauge and push in
direction illustrated. The connector locks automatically.
2.2 SWITCH ON GAUGE
Switch on - press .
Switch off - press and hold .
2.3 INTERFACING WITH A PC
® ®
Your gauge has a Bluetooth interface. Connect your gauge to your PC using Bluetooth
for quick and easy data transfer and welcome screen download - see "Transferring
readings to a computer" on page 11.
® ®
If your PC does not have a Bluetooth interface, use a Bluetooth to USB convertor (see
"Spares and accessories" on page 16) or connect your gauge using the serial interface
located on the side of your gauge. Connect your gauge to the PC using the optional PC
connection cable.
4