Analysing Data - Elcometer Novo-Gloss 406 Operating Instructions Manual

5 ANALYSING DATA

5.1 To enter Statistics Mode
1. Turn the gauge on and press the SCROLL UP/DOWN key.
The gauge displays the measurement angle with the minimum (MIN) and maximum (MAX) values for
the stored data.
2. Press the READ/SELECT key to switch the display to show the other statistical values for the data.
These are the mean (MEAN), the Coefficient of Variation (CV) and the Standard Deviation (SD).
These terms are defined below.
5.2 To exit statistics mode
Press the SCROLL/DOWN key once.
STATS MIN MAX
60° 42.8 60.7
MEAN CV SD
51.8 0.244 12.6
13