Getting Started - Elcometer 319 Standard Operating Instructions Manual

R

3 GETTING STARTED

3.1 POWER SUPPLY
Your gauge is powered by batteries or by a USB cable when it is connected
to a computer. An icon in the top right of the display indicates which power
supply is being used / .
Attention: The USB power supply cannot be used to charge batteries.
Note: The USB cable is supplied with the Top gauge only and it can be used
to power the gauge and also for transfer of data - see page 28. Users of the
Standard gauge can purchase a USB cable (see page 33) but its use is
limited only to supplying power to the gauge and creating a user screen (see
page 30).
The battery power supply symbol indicates the condition of the batteries;
Socket for USB cable
the more segments displayed, the better the condition of the batteries.
under rubber flap
When no segments are displayed it is not advisable to use the gauge for
interval logging [T] over long periods of time. If the batteries are replaced
during interval logging, the gauge may show Please Wait whilst it re-
calculates the batch statistics.
When the batteries are nearly depleted, the battery power supply symbol
starts blinking and the gauge emits short beeps every 10 seconds to indicate
that the batteries have to be changed.
6