Deleting Data - Elcometer Novo-Gloss 406 Operating Instructions Manual

3.5 Taking subsequent readings
Repeat the procedure in section 3.3 or section 3.4 to take further measurements. Each time a measurement
is taken the number of readings stored increases by one. If an erroneous reading is taken it can be deleted.
See "Deleting data" on page 11.
Measurements can be taken using both angles of the Dual Angle Gauge, as the data is stored separately
in the gauge.

4 DELETING DATA

4.1 Deleting a single reading
1. Press the SCROLL UP/DOWN key until the following message is displayed:
2. Press the READ/SELECT key.
The display will read:
3. Press the READ/SELECT key to confirm. The last reading will be deleted and the display will read:
Delete Sample
60° 94.2 10
Are You Sure?
Press Read Key
Delete Sample
60° 96.1 9
11