Quick-Start; Getting Started - Elcometer 331 H Operating Instructions Manual

R

2 QUICK-START

Note: Before switching the Half-Cell Meter on for the first time read "Selecting a language" on page 14.
To configure the Half-Cell Meter quickly and start taking readings:
1. Charge the batteries
2. Fit half-cell probe and cables
3. Switch on
4. Select language
5. Take readings of half-cell potential
For an overview of your Half-Cell Meter menus and functions, see pages 16 to 17.

3 GETTING STARTED

This section of the instructions is intended for first-time users of the Half-Cell Meter. It contains essential
information about batteries, assembling the Half-Cell Meter, the controls and the display. At the end of this
section you will be ready to take readings.
3.1 THE POWER SUPPLY
Your Half-Cell Meter is powered by a rechargeable Lithium-Ion
or outside the Half-Cell Meter.
a. The Half-Cell Meter is not designed to operate using dry cell batteries.
6
see page 7
see page 10
see page 12
see page 14
see page 18
a
battery pack which can be charged inside