Clearing Statistical Data - Elcometer 345 Operating Instructions Manual

R
If is pressed the gauge displays the next statistical value on the user list for a minimum of 3
seconds.
If is pressed the gauge displays the previous statistical value on the user list for a minimum of 3
seconds.
• To display the rest of the list of values
display.
• To exit the list press
STATISTICAL SYMBOLS
= Number of readings
= Mean (Average)
= Standard Deviation
H = Highest reading
L = Lowest reading

6.3 CLEARING STATISTICAL DATA.

• To clear the statistical data when starting a new set of data press
display will show CLs to indicate "Clear Statistics?".
• Press to clear statistics memory or press
4
Note: Err is displayed when the memory for statistical values is full.
22
or
.
must be pressed while the current value is on the
to exit without clearing the statistics memory.
>>>> >>>> . The