Table of Contents
Advertisement
R
5 DELETING DATA
1. Press the SCROLL UP/
DOWN key until either of
the following messages is
displayed
(message
depends upon operating
mode - opacity or shade):
2. Press the READ/SELECT key.
The display will show:
3. Press the READ/SELECT key to confirm.
b
The last
reading will be
deleted and the gauge will
prompt
for
deletions:
4. If necessary, continue to delete further readings by pressing the READ/SELECT key.
5. When you have finished deleting, press the CANCEL key to return to the measurement screen.
b.
To delete ALL readings (clear the entire memory of the gauge), at step 2, press and hold the READ/SELECT key for
four seconds and then confirm deletion. Stored data can also be cleared from the gauge using the Delete Data func-
tion in Novo-Soft™ when the gauge is connected to the PC. See "Novo-Soft™ software" on page 25.
12
Shade mode
Delete Sample
45/0
Delete Sample
45/0
further
or
97.6
4
or
94.2
3
Opacity mode
Delete Sample
WHITE
90.6
ARE YOU SURE ?
Press Read Key
Delete Sample
WHITE
91.2
3
2
Advertisement
Table of Contents
