Setting Up A Soundmap Event Trigger On A Wago Unit - Fluke SV600 Series User Manual

SV600 Dashboard 5

Setting up a SoundMap Event Trigger on a Wago Unit

5.7 Setting up a SoundMap Event Trigger on a Wago Unit
First go to the management page and check if a valid SoundMap is running. If no SoundMap is running either
create a new one or go to the streaming page to generate one.
Next go to the event tab and create a new event with the SoundMap measurement as an input, and a recognizable
tag.
Then go to the callback tab, and create a new WAGO Output channel.
Fill in the required fields, and test your callback by pressing the test button to validate it is set up correctly.
If your settings are correct this should send the signal you have set up to the WAGO unit.
39