Fluke ii900 User Manual
Sonic industrial imager
Hide thumbs
Also See for ii900:
- User manual (22 pages) ,
- User manual (2 pages) ,
- Field upgrade instructions (2 pages)
Related Manuals for Fluke ii900
Summary of Contents for Fluke ii900
- Page 1 Sonic Industrial Imager Users Manual April 2019 ©2019 Fluke Corporation. All rights reserved. All product names are trademarks of their respective companies.
- Page 2 LIMITED WARRANTY AND LIMITATION OF LIABILITY This Fluke product will be free from defects in material and workmanship for two years from the date of purchase. This warranty does not cover fuses, disposable batteries, or damage from accident, neglect, misuse, alteration, contamination, or abnormal conditions of operation or handling.
-
Page 3: Table Of Contents
How to Contact Fluke ........ - Page 4 Users Manual Settings ..................11 File format .
-
Page 5: Introduction
Introduction How to Contact Fluke The Fluke ii900 is a Sonic Industrial Imager (the Product or To contact Fluke, call one of the following telephone numbers: Imager) primarily used to detect and locate leaks in compressed • Technical Support USA: 1-800-44-FLUKE (1-800-443-5853) air, compressed gas, and vacuum systems. -
Page 6: Before You Start
EDBC290 External Battery Charger/Power Supply with Country-Specific Adapters 5077735 / TiX5XX-NECK Neck Strap 4574715 ii900 Hand Strap Hand Strap 5075994 USB-C Cable, 1 m (3.3 ft) ii900 Array Covers Acoustic Sensor Covers (includes 1 spare cover) 5075982 ... -
Page 7: Terms To Know
Sonic Industrial Imager Before You Start Terms to Know Frequency Selection / Frequency Filtering / Selected Frequency Band. Select a frequency band for measurement and Use this section to familiarize yourself with these terms that are visualization of sound. When a frequency band is selected, any unique to this Imager and sound pressure measurements. -
Page 8: Battery
• Do not incinerate the Product and/or battery. outlet before the charger. • Use only Fluke approved power adapters to A Li-ion battery powers the Imager. The Imager includes two charge the battery. batteries for a quick-change during operation. •... - Page 9 Sonic Industrial Imager Before You Start The battery has an indicator with four LEDs (25 %, 50 %, 75 %, Figure 1. Battery and 100 % charge) and a test button. To check the battery charge, push . The LEDs light to show the battery charge level. If all four LEDs are on, the battery charge is at 100 % of capacity.
-
Page 10: Features/Buttons
Users Manual Features/Buttons Table 2 is a list of the Imager features. Table 2. Feature/Control Descriptions Button Function Button Function Power On/Off Acoustic Sensor Hand Strap Battery Compartment Touchscreen Display USB-C Connector ... -
Page 11: Hand Strap/Neck Strap
Sonic Industrial Imager Hand Strap/Neck Strap Hand Strap/Neck Strap Display The Imager includes a hand strap and a neck strap that makes it The color display is a touchscreen that shows the test area as a easy to hold and operate as you take measurements. See Figure 2 visual image combined with a sound image. -
Page 12: Menus
Users Manual Menus Memory The Memory menu shows an overview of all the still photo and To view the tool menu, tap your finger on the display. This action video captures with a thumbnail image. Each thumbnail includes reveals the menu for parameter settings. Tap anywhere on the an icon to indicate the file type: display outside the menu to hide the menu. -
Page 13: Text Note
Sonic Industrial Imager Menus An icon also identifies the annotation type. Photo Note Text Note To add a Photo Note: Tap on the image file to open the file on the display. To add a text note: Tap on the image file to open the file on the display. to open the Photo Note Menu. -
Page 14: Acoustics
Users Manual Acoustics Frequency Profiles A frequency profile is the band of frequencies that you select as an The Acoustics menu shows all the available settings for overlay on the visual image. The high and low frequency defines adjustment. -
Page 15: Settings
Sonic Industrial Imager Menus Settings Localization • select language The Settings menu shows all the available settings for adjustment. • set decimal separator to point or comma File format • set image format (JPEG or PNG) Factory settings • reset the unit to factory settings •... -
Page 16: Basic Operation
Users Manual Basic Operation Table 4. Frequency Band Adjustment The Imager works much like a point-and-shoot camera. W Caution Do not place hand on or obstruct the acoustic sensor. Always use the sensor cover when the Product is not in use. -
Page 17: File Transfer
Sonic Industrial Imager File Transfer File Transfer Note High frequency peaks within the selected band may be To transfer saved files from the Imager to a PC: caused by sources other than a leak. In this case, Use the provided USB cable to connect the Imager to the PC. move the band to another frequency range. -
Page 18: Firmware Update
W Caution To update: The optical surfaces of the lens are equipped with Download the firmware update from the Fluke website to a high-quality optical layers. Avoid any contact with these surfaces and protect these surfaces against dirt and damages. -
Page 19: Environmental
How to Contact Fluke for more information. Service An authorized Fluke Calibration service center should service the Imager at two-year intervals to maintain optimum performance. Contact your equipment distributor or authorized Fluke Calibration Service Center for any equipment performance failure or to schedule regular maintenance service. - Page 20 Users Manual...
Need help?
Do you have a question about the ii900 and is the answer not in the manual?
Questions and answers