Management; Measurements - Fluke SV600 Series User Manual

5.5 Management Pages
In the management pages, a user can see which entities are running and active on the device. There are tabs for
different groups of entities. Certain entities are made by the dashboard. They have a visible tag and a flag indicating
this.

5.5.1 Measurements

•
To the left is a list of all active measurements on the device.
"Tag" is a human readable name of a measurement
o
"Id" is the unique number assigned to each measurement. Ids are always unique; tags don't
o
have to be.
o
An open eye in the last column shows that a measurement is created by the front-end. A closed
eye means a measurement is created by a user.
"New easurement" can be clicked to start adding a new measurement. The settings to the right
o
should then be filled in.
•
To the right the settings of a selected or new measurement can be seen
"Tag" is the name of the measurement
o
" easurement Type" is the type of measurement. Examples are Leq or spectrum
o
"Channel Handling" tells is the measurement will combine the 64 channels or gives back
o
separate results.
"Weighting" can be used to apply a certain pre-defined acoustic weighting to results
o
"Reporting Interval" is how often the measurement will produce a result. Audio is averaged over
o
this duration.
"frequency ranges" can be selected and edited, added or removed.
o
SV600 Dashboard 5
Management Pages
33