Fluke SV600 Series User Manual page 18

SV600 Series
Users Manual, Rev. 2.1, Nov 2021
Step 1
Keep the serial number of the SV600 ready. The serial number can be found on the back of the device at the
bottom-left.
Step 2
Open your web browser (Chrome, Firefox, Edge, Safari).
Step 3
Type http://<serial number> in your address bar. E.g. http://100110001
http://100110001
If your network does not have DNS server or if you connected the device directly to your PC add .local at the end
of the serial number address. e.g. http:// 100110001.local
Step 4
Your browser will now show the device dashboard and prompt you to login. The default credentials are:
Username: admin
Password: admin
Step 5
In the device dashboard go to the "Device Configuration" page and click on Device Information
http://100110001
18