Actions; Api Documentation - Fluke SV600 Series User Manual

SV600 Series
Users Manual, Rev. 2.1, Nov 2021

5.5.6 Actions

•
To the left is a list of all active actions on the device. The system currently only supports one action,
which can be activated by the user.
•
To the right are the settings of the selected action.

5.6 API Documentation

This page contains documentation on the SV600 device. The API is based on a HTTP REST API. All calls are
communicated via HTTP or WebSocket. The API protocol is split in three levels. The device hosts the following
documents:
1. Sound Source Detection API
2. Authentication API
3. Device manager
4. Quick Start Guide PDF
5. User manual PDF
38
"Tag" is a human readable name of an action.
o
"Id" is a unique id the system assigned to this action.
o
"Trigger" which entity triggers (enables) this action.
o
"Action type" which action to perform when a trigger is received.
o
"Frequency ranges" can be selected and edited, added or removed. Note that there is a
o
maximum total range the device can analyze. In this release this is 8000Hz.
o
EventWithAS2 only settings.
▪ "Event trigger" while active, which input will trigger this action's action
▪ "Output Channel" to which output channel any received inputs are forwarded to.