Mounting Notes - Siemens LMV50 Series Manual

Notes on mounting the LMV5
12/327
Building Technologies

1.2 Mounting notes

∂
Ensure that the relevant national safety regulations are complied with
∂
In the geographical areas where DIN regulations apply, the requirements of VDE
must be satisfied, especially the standards DIN/VDE 0100, 0550, and
DIN/VDE 0722
∂
M5 fixing screws in the LMV5 housing with a maximum tightening torque of 2 Nm.
The thread of the mounting plate should be checked with regard to the maximum
tightening torque in the application or defined accordingly.
Figure 1: Mounting the LMV5
Basic Documentation LMV5...
1 Safety notes
CC1P7550en
22.05.2018