Siemens LMV50 Series Manual page 169

7. LMV50/LMV51.
activating and
deactivating the
actuators
Menu level 1 Menu level 2
Params & Display
RatioControl
LMV52
Menu level 1 Menu level 2
Params & Display
RatioControl
LMV50 / LMV51.3 and
LMV52.2
Building Technologies
In accordance with the application (with or without auxiliary actuator) and the type of
fuel, the auxiliary actuator can be activated, deactivated or – in connection with the
LMV50 / LMV51.3 – be used as a VSD and/or auxiliary actuator 3 for the flue gas
recirculation function (refer to chapter Actuator addresses).
Menu level 3
GasSettings
OilSettings
The actuators can be activated and deactivated in accordance with the application and
the type of fuel. Here, it is also defined whether the relevant actuator is used for
regulating the air volume. The definition of air-regulating actuators is required for
applications employing VSD and O2 trim control.
Menu level 3
GasSettings
OilSettings
For the configuration of VSDs, refer to chapter Configuring the VSD.
Basic Documentation LMV5...
9 Commissioning instructions for the LMV5
Menu level 4 Menu level 5
AirActuator
AuxActuator
GasActuator
AirActuator
AuxActuator
OilActuator
Menu level 4 Menu level 5
AirActuator
AuxActuator 1
AuxActuator 2
AuxActuator 3
VSD
GasActuator
AirActuator
AuxActuator 1
AuxActuator 2
AuxActuator 3
VSD
OilActuator
Menu level 6
Menu level 6
169/327
CC1P7550en
22.05.2018