Siemens LMV50 Series Manual page 82

Legend to the sequence diagrams (cont'd)
82/327
Building Technologies
Signal ON Signal OFF
0...3 s
Output OFF / input Don't care
Output ON / input ON
Permissible positioning range
In Standby: actuator can travel within the permissible positioning range, but is always driven
to the home position. Must be in the home position before changing the phase
0° Position as supplied (0°)
90° Actuator fully open (90°)
Basic Documentation LMV5...
5 Sequence diagrams
Next phase
01 00, repetition = 0
12, repetition > 0
Parameter NormalDirectstart
Checking with controller ON
Deviation ↑ 10
No repetition decrement
10
70
Without valve proving ↑ 70
With valve proving ↑ 80
62
Stop, upto phase maximum time ↑ 01
Stop, upto phase maximum time ↑ 10
CC1P7550en
22.05.2018