Inlet, Inlet Ring & Debris Deflector Installation - Peco 06742408 Operator's Manual

Inlet, Inlet Ring & Debris Deflector Installation
Open box door. From inside box, slide Inlet (Item #4) halfway into inlet hole of the Right Box Side (Item #1), see
Figure A. Take each half of the Inlet Ring (Item #2) and attach around matching groove in Inlet (Item #4). Slide Inlet
(Item #4) & Inlet Ring (Item #2) against inlet hole and align four holes. Fasten Inlet Ring (Item #2) bottom holes using
(2) 5/16" IT Tooth Lock Washers (Item #5) & (2) 5/16"-18 x 1/2" HHCS (Item #7) (See Figure B). Fasten Inlet Ring
(Item #1) top holes using (2) 5/16" IT Tooth Lock Washers (Item #5) & (2) 5/16"-18 x 1-1/4" HHCS (Item #6). Slide
Debris Deflector (Item #3) over inside top bolt threads (Item #7). Fasten Debris Deflector (Item #3) using (2) 5/16"-18
Ny-Flange Lock Nuts (Item #8). Final assembly should resemble Figure C.
Note: Some parts and part features have been hidden from view for visual clarity.
Figure A Figure C
Figure B
16