Table of Contents
Advertisement
Box Support Frame Assembly Installation
Note: It is recommended that someone assist you in the installation of the Box Support Frame Assy (Item #1).
First, align the lower bolt hole of the Left or Right Leg of the Box Support Frame Assembly (Item #1) to the bolt hole of
the Frame Side (Item #2). Secure the Left or Right Leg to the Frame Side by using (1) 3/4"-10 x 1-3/4" HHCS (Item
#3), (1) 3/4" Flat Washer (Item #4) and (1) 3/4"-10 Nyloc Nut (Item #5) PER Leg. See Figure A. Leave hardware
relatively loose until the end of this step.
Next, align the square bolt hole of either left or right Frame Side (Item #2) to the pivot channel of the Left or Right Leg
of the Box Support Frame Assy (Item #1). Secure the Left or Right Leg to the Frame Side by using (1) 1/2"-13 x 1"
Carriage Bolt (Item #6) and (1) 1/2"-13 Adjustable Handle (Item #7) PER Leg. See Figure A.
Finally, push the entire assembly forward positioning and resting the front (2) bolts within the Frame Support Brace as
shown in Figure B. Once in place, tighten the 3/4"-10 x 1-3/4" HHCS pivot bolt to secure the Box Support Frame
Assembly while still allowing the Box Support Frame Assembly to move freely.
Note: Some part and part features have been hidden from view for visual clarity.
Figure A
Figure B
11
Advertisement
Table of Contents
