Advanced Task
•
Tare Process Function
To set-up a Tare function, enable TARE from the process menu and press F1
to enter the Tare SETTINGS functions.
Disable TARE by entering process menu and turning the function OFF.
Note: Last TARE setting is retained and will be applied when function is
next enabled.
Tare Current Measurand Reading To tare-off the current display reading,
proceed as follows (e.g.),
Tare Off An Entered Value To tare-off an entered value current, proceed as
follows (e.g.),
Note: Display shows the last entered Tare Value.
Process Functions
21
K249 Issue No. 4