Clearing Alarms - GE CB Watch 3 User Manual

Clearing alarms

Some alarms depend on the status of a continuous measurement and auto clear
themselves when the status changes. Other alarms are based on an operation and will
stay active based on the value recorded during the last operation. They can however be
cleared manually by:
Selecting the "Clear alarms" relay assignment
-
Pressing the "Set" button
-
There are two alarm clearing buttons:
One for all the gas related alarms
-
HMI: Settings / Alarms / Gas
One for all the operations related alarms
-
HMI: Settings / Alarms / Operations
CB Watch 3 User Manual
Figure 153 – Clearing gas related alarms
Figure 154 – Clearing operations related alarms
v6.3 - May 2019 Page 94 of 100