Sample Application; Figure 3-1: Serial Terminal Settings Rz/N1 - Renesas RZ Series Quick Start Manual

RZ/N1D/S/L Group
Application Note
PROFINET Quick Start Guide

3.3 Sample Application

Several sample applications are provided for port GmbH's PROFINET device stack. They show how to set
up and use the stack. The following examples can be found in the folder goal/appl/goal_pnio/
08_dynamic_modules Dynamic module demonstration
18_dyn_mod_postpone* ExpectedSubmoduleBlock post-poning example
21_pnio_snmp_dm*** Simple I/O data mirror example incl. SNMP and MCTC
All applications not marked with * or ** can be used both in the standalone variant on the CC or in the
Core To Core variant for the AC.
* This application is only available on communication core as standalone only.
** This application is only usable on communication core in Core To Core variant.
*** This application is only available on application core in Core To Core variant.
R11QS0010ED0143 Rev.1.4.3
July 09, 2019
Preliminary document. Specifications in this
document are tentative and subject to change.

Figure 3-1: Serial Terminal settings RZ/N1

00_rpc_cc** communication core CTC counterpart for AC
01_simple_io Simple I/O data mirror example
02_io_demo Maps the I/O data on the LEDs and buttons
03_record_write Shows how to process a record write
05_ioxs_states IOPS and IOCS handling
06_apdu_status Like IOxS status but for APDU
07_alarm_button Trigger an alarm with a button
09_busy_records Demo for postponing record handling
10_led_demo DCP signal on LED demo
11_multiple_write Process a multiple write request
13_pnio_snmp Simple I/O data mirror example incl. SNMP
14_info_set Set the device information data
15_config_set Set the PROFINET config data
16_device_name* Set device name in application
17_process_alert* Cyclically process alarm sending example
19_subst_val* Substitute value and APDU status example
20_subst_mod* Substitute value module acceptance example
3. Project Setup
Page 9 of 26