Figure 3-8: Spi Connection Of Synergy S7Gs-Sk (Left) And Rz/N1L (Right) - Renesas RZ Series Quick Start Manual

RZ/N1D/S/L Group
Application Note
PROFINET Quick Start Guide

Figure 3-8: SPI connection of Synergy S7GS-SK (left) and RZ/N1L (right)

function
GND
SPI Clock
MISO
MOSI
SPI chip select
Please note the synergy quick start guide for setup the named core. By default, the RZ/N1L uses the SPI
channel 5 and the following GPIOs
Note:
The board supports only SPI mode 1 and 3. Please set the SPI mode to 3 by defining
GOAL_GLOB_MA_SPI_ID_0_MODE_3 in goal/goal_global/goal_global.h to 1.
#define GOAL_GLOB_MA_SPI_ID_0_MODE_3 1
R11QS0010ED0143 Rev.1.4.3
July 09, 2019
Preliminary document. Specifications in this
document are tentative and subject to change.
color
Black
Green
Blue
Yellow
Red
Table 3-2: PINs for SPI usage
GPIO
62
63
64
65
Table 3-3: GPIOs for SPI usage
S7GS-SK
J24-7
J24-6
J24-5
J24-4
J24-3
Usage
SPI clock
MOSI
MISO
SPI chip select
/**< set SPI mode 3 on MA ID 0 */
3. Project Setup
RZ/N1L
CN20-5
CN20-4
CN20-3
CN20-2
CN20-1
Page 18 of 26