Figure 4-4: Connect The Devices; Figure 4-5: Check The Ip Address - Renesas RZ Series Quick Start Manual

RZ/N1D/S/L Group
Application Note
PROFINET Quick Start Guide
8. Check the IP address of the PLC (Figure 4-5):
o Change to "Device view"
o Choose the PLC device
o Click on the PLC in the "Device view"
o The IP address in the "General" window must be the same as set in the PLC
9. Set the name of RZ/N1 (Figure 4-6):
o Double click on your network interface card (in "Project tree" > Online access)
o Open "Online & diagnostics" of the RZ/N1 device
o Go to the function setting "Assign Name"
o Change the device name
o Press "Assign name" button
R11QS0010ED0143 Rev.1.4.3
July 09, 2019
Preliminary document. Specifications in this
document are tentative and subject to change.

Figure 4-4: Connect the devices

Figure 4-5: Check the IP address

4. Setting up a PROFINET
PLC (Tia Portal with S7-
1500)
Page 21 of 26