4.3 Finishing Guidelines for
Optional Surrounds
•
FIGURE 4.9 shows where to end finishing materials, measured
from the finishing edge, to allow installation of any optional
surround. Some thicker finishing materials may not fit behind
the optional surround(s) when installed.
•
Measurement 'A' shows the space to leave on each side.
•
Measurement 'B' shows the space to leave on the top and
the bottom.
CW50-RS
CW50-RS4
CW50-GS
CW50-FS
FIGURE 4.9 Finishing Material Guidelines for Optional Surrounds
36
#CLW-50-MV
R.1 October 2021
Surround Edge
Finishing Trim Edge
Surround
B
A
3/4" (19mm)
2-5/8" (66mm)
6" (152mm)
3-1/8" (79mm)
HUSSONG MFG. CO., INC.
SECTION 4 FACING AND FINISHING
Finishing Guidelines for Optional Surrounds
A
B
3/4" (19mm)
2-5/8" (66mm)
2-1/2" (64mm)
3-1/8" (79mm)
KOZY HEAT FIREPLACES