Table of Contents
Advertisement
10.1 Flame Height and Heat
Output Adjustment
This fireplace is equipped with a manual HI/LO pressure modulator
knob, located on the gas valve, for adjusting main burner flame
height and the heat output of the fireplace. See FIGURE 10.1.
•
Open the control compartment access panel to access the gas
valve and the HI/LO pressure regulator knob.
•
To adjust, turn the HI/LO knob counterclockwise to LO position
or clockwise to HI position, until desired flame appearance and
heat output is achieved. Reinstall the control compartment
when finished.
FIGURE 10.1 Millivolt Gas Control Valve
HUSSONG MFG. CO., INC.
KOZY HEAT FIREPLACES
Gas control knob
HI/LO pressure regulator knob
SECTION 10 LIGHTING INSTRUCTIONS
59
#CLW-50-MV
R.1 October 2021
Advertisement
Table of Contents
