Wiznet WizFi320 User Manual page 41

<enable>:
•
o
o
<hostname>: mDNS host name.
•
• <service_name>: mDNS service name.
<port>: mDNS port.
•
Example
AT+MDNS=1,"espressif","_iot",8080
AT+MDNS=0
[ESP32 Only] AT+CWJEAP: Connect to a WPA2
Enterprise AP
Query Command
Function:
Query the configuration information of the Enterprise AP to which the ESP
station is already connected.
Command:
AT+CWJEAP?
Response:
+CWJEAP:<ssid>,<method>,<identity>,<username>,<password>,<security>
OK
Set Command
Function:
Connect to the targeted Enterprise AP.
Command:
AT+CWJEAP=<ssid>,<method>,<identity>,<username>,<password>,<security>[,<jeap_timeout
>]
Response:
OK
or
+CWJEAP:Timeout
ERROR
© Copyright 2021 WIZnet Co., Ltd. All rights reserved.
1: Enable the mDNS function. The following three parameters
need to be set.
0: Disable the mDNS function. The following three parameters
does not need to be set.
WizFi320 User Manual
41