Wiznet WizFi320 User Manual page 25

Example
// The first parameter
ordered according to RSSI;
// The second parameter
<print mask> are set to
AT+CWLAPOPT=1,31
AT+CWLAP
// Just show the AP which authmode
AT+CWLAPOPT=1,31,-100,1
AT+CWLAP
AT+CWLAP: List Available APs
Set Command
Function:
Query the APs with specified parameters, such as the SSID, MAC address, or
channel.
Command:
AT+CWLAP=[<ssid>,<mac>,<channel>,<scan_type>,<scan_time_min>,<scan_time_max>]
Execute Command
Function:
List all available APs.
Command:
AT+CWLAP
Response:
+CWLAP:<ecn>,<ssid>,<rssi>,<mac>,<channel>,<freq_offset>,<freqcal_val>,<pairwise_cip
her>,<group_cipher>,<bgn>,<wps>
OK
Parameters
• <ecn>: encryption method.
o
o
o
o
o
o
o
o
© Copyright 2021 WIZnet Co., Ltd. All rights reserved.
is 1, meaning that the result of the command AT+CWLAP will be
is 31, namely 0x1F, meaning that the corresponding bits of
1. All parameters will be shown
is OPEN
0: OPEN
1: WEP
2: WPA_PSK
3: WPA2_PSK
4: WPA_WPA2_PSK
5: WPA2_ENTERPRISE
6: WPA3_PSK
7: WPA2_WPA3_PSK
WizFi320 User Manual
in the result of AT+CWLAP.
25