Wiznet WizFi320 User Manual page 37

o
Example
AT+CIPSTA="192.168.6.100","192.168.6.1","255.255.255.0"
AT+CIPAP: Query/Set the IP Address of an ESP
SoftAP
Query Command
Function:
Query the IP address of the ESP SoftAP.
Command:
AT+CIPAP?
Response:
+CIPAP:ip:<"ip">
+CIPAP:gateway:<"gateway">
+CIPAP:netmask:<"netmask">
+CIPAP:ip6ll:<"ipv6 addr">
+CIPAP:ip6gl:<"ipv6 addr">
OK
Set Command
Function:
Set the IPv4 address of the ESP SoftAP.
Command:
AT+CIPAP=<"ip">[,<"gateway">,<"netmask">]
Response:
OK
Parameters
<"ip">: string parameter showing the IPv4 address of the ESP SoftAP.
•
<"gateway">: gateway.
•
<"netmask">: netmask.
•
<"ipv6 addr">: string parameter showing the IPv6 address of the ESP
•
SoftAP.
Notes
© Copyright 2021 WIZnet Co., Ltd. All rights reserved.
The last configuration overwrites the previous configuration.
WizFi320 User Manual
37