Disconnect all stations that are connected to the ESP SoftAP.
Command:
AT+CWQIF
Response:
OK
Set Command
Function:
Disconnect a specific station from the ESP SoftAP.
Command:
AT+CWQIF=<mac>
Response:
OK
Parameter
<mac>: MAC address of the station to disconnect.
•
AT+CWDHCP: Enable/Disable DHCP
Query Command
Command:
AT+CWDHCP?
Response:
<state>
Set Command
Function:
Enable/disable DHCP.
Command:
AT+CWDHCP=<operate>,<mode>
Response:
OK
© Copyright 2021 WIZnet Co., Ltd. All rights reserved.
WizFi320 User Manual
29