Wiznet WizFi320 User Manual page 34

Query the MAC address of the ESP Station.
Command:
AT+CIPSTAMAC?
Response:
+CIPSTAMAC:<mac>
OK
Set Command
Function:
Set the MAC address of an ESP station.
Command:
AT+CIPSTAMAC=<mac>
Response:
OK
Parameters
<mac>: string parameter showing MAC address of an ESP station.
•
Notes
The configuration changes will be saved in the NVS area
•
if AT+SYSSTORE=1.
The MAC address of ESP SoftAP is different from that of the ESP Station.
•
Please make sure that you do not set the same MAC address for both of
them.
Bit 0 of the ESP MAC address CANNOT be 1. For example, a MAC
•
address can be "1a:..." but not "15:...".
FF:FF:FF:FF:FF:FF and 00:00:00:00:00:00 are invalid MAC address and
•
cannot be set.
Example
AT+CIPSTAMAC="1a:fe:35:98:d3:7b"
AT+CIPAPMAC: Query/Set the MAC Address of
an ESP SoftAP
Query Command
Function:
© Copyright 2021 WIZnet Co., Ltd. All rights reserved.
WizFi320 User Manual
34