Wiznet WizFi320 User Manual page 33

Note
Currently ESP devices only support 802.11b or 802.11bg or 802.11bgn
•
mode.
By default, PHY mode of ESP8266 device is 802.11bg mode, and PHY
•
mode of non ESP8266 device is 802.11bgn mode.
AT+CWSTAPROTO: Query/Set the 802.11 b/g/n
Protocol Standard of Station Mode
Query Command
Command:
AT+CWSTAPROTO?
Response:
+CWSTAPROTO=<protocol>
OK
Set Command
Command:
AT+CWSTAPROTO=<protocol>
Response:
OK
Parameters
<protocol>:
•
o
o
o
Note
Currently ESP devices only support 802.11b or 802.11bg or 802.11bgn
•
mode.
By default, PHY mode of ESP8266 device is 802.11bg mode, and PHY
•
mode of non ESP8266 device is 802.11bgn mode.
AT+CIPSTAMAC: Query/Set the MAC Address of
an ESP Station
Query Command
Function:
© Copyright 2021 WIZnet Co., Ltd. All rights reserved.
bit0: 802.11b protocol standard.
bit1: 802.11g protocol standard.
bit2: 802.11n protocol standard.
WizFi320 User Manual
33