Wiznet WizFi360 At Instruction Set
  1. Manuals
  2. Brands
  3. Wiznet Manuals
  4. Wireless Router
  5. WizFi360 Series
  6. At instruction set

Wiznet WizFi360 At Instruction Set

Hide thumbs Also See for WizFi360:
Table of Contents

Advertisement

Quick Links

Download this manual
WizFi360
AT Instruction Set
Version 1.0.0
http://www.wiznet.io/
© Copyright 2019 WIZnet Co., Ltd. All rights reserved.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WizFi360 and is the answer not in the manual?

Questions and answers

S. TERRY BEAL
May 6, 2025

I have PB13 tied to GND to operate in SPI mode. When I send any AT command over SPI, all I ever receive back is "ready". I don't know why.

0
1 comments:
Mr. Anderson
May 18, 2025

Receiving only "ready" when sending AT commands over SPI to the Wiznet 360 with PB13 tied to GND could be due to PB13 being configured as I²C_SCL. Tying it to GND may interfere with I²C or SPI operation, potentially preventing proper communication or command parsing by the module.

This answer is automatically generated

0

Subscribe to Our Youtube Channel

Related Manuals for Wiznet WizFi360

Summary of Contents for Wiznet WizFi360

  • Page 1 WizFi360 AT Instruction Set Version 1.0.0 http://www.wiznet.io/ © Copyright 2019 WIZnet Co., Ltd. All rights reserved.

  • Page 2: Table Of Contents

    3.2.2.20 AT+CIPAP_DEF : Setting IP information SoftAP mode, save to Flash ............. 33 3.2.2.21 AT+CWDHCPS_CUR : Setting IP allocated by WizFi360 DHCP(SoftAP), Not saved to Flash ....34 3.2.2.22 AT+CWDHCPS_DEF : Setting IP allocated by WizFi360 DHCP(SoftAP), saved to Flash ......35 3.2.2.23 AT+CWSAP_CUR : Configures the WizFi360 SoftAP mode, Not saved to Flash ........
  • Page 3 3.2.4.3 AT+CIPDOMAIN : DNS Function ......................62 3.2.4.4 AT+PING : Ping Packets .......................... 63 3.2.4.5 AT+CIPSNTPCFG : SNTP and time zone setting function ................ 63 3.2.4.6 AT+CIPSNTPTIME : Checks the SNTP Time ..................... 64 Appendix ....................................66 WizFi360 AT command...

  • Page 4: Document Revision History

    1 Document Revision History Version Date Descriptions Ver. 1.0.0 1AUG2019 Initial Release WizFi360 AT command...

  • Page 5: At Command Overview

    2 AT Command Overview 2.1 AT Command Format WizFi360 support AT command interface is a standard format of its AT command is fixed, AT commands must be capital letters, and always start with "AT", to "\r\n " ending. Overall WizFi360 AT commands are the following formats:...

  • Page 6: List Of Messages

    AT \r & lt \ n, the respond to the \r\nOK\r\n. When data is WizFi360 transparent mode, the serial input to any AT commands are invalid, and are treated as data transmission to the peer. At this time, the serial input thereto "+++", WizFi360 switches to the AT command mode.

  • Page 7: At Command Description

    AT+CWLAPOPT AP scan results display settings AT+CWJAP_CUR Temporary connection designated AP, is not saved to Flash AT+CWJAP_DEF Connection designated AP, saved to Flash AT+CWAUTOCONN Electrically connecting the set automatic AP AT+CWQAP Disconnecting the connection with the AP WizFi360 AT command...
  • Page 8 TCP send inquiry write cache of a package sent successfully AT+CIPDINFO Receiving data format AT+CIPCLOSE Close TCP, UDP AT+CIFSR Query IP and MAC address information TCP Server communication connection is provided without AT+CIPSTO disconnection time interval AT+GMR Firmware version information Management Command AT+CIUPDATE Firmware Upgrade WizFi360 AT command...
  • Page 9 AT+CIPDOMAIN Use domain name resolution AT+PING Use the Ping function AT+CIPSNTPCFG Set time zone and SNTP function AT+CIPSNTPTIME Query current network standard time WizFi360 AT command...

  • Page 10: At Command Description

    Command: ATE1\r\n Examples Reply:\r\n OK\r\n Command Description: - This setting is not saved to the Flash, the next reboot / after power is invalid. 3.2.1.3 AT+RST : Restart module Command string Function Description AT+RST Restart module Parameters description WizFi360 AT command...

  • Page 11: At+Restore : Restore Factory Settings

    \r\n OK\r\n descriptions Command: AT+RST\r\n Examples Reply:\r\n OK\r\n Command Description: The execution of this command will restore the settings not saved in flash and restart the WizFi360. 3.2.1.4 AT+RESTORE : Restore factory settings Command string Function Description AT+RESTORE reset Parameters...

  • Page 12: At+Uart_Def : Set The Serial Port Parameters, Save To Flash

    Command Description: This setting is not saved to the Flash, the next reboot / after power is invalid. NOTE: If using WizFi360 hardware flow control, the user needs to access the flow control device of pin WizFi360, refer to the specific connection WizFi360 User Manual.
  • Page 13 Command Description: This setting will be saved to Flash, after the next reboot / power still valid. NOTE: If using WizFi360 hardware flow control, the user needs to access the flow control device of pin WizFi360, refer to the specific connection WizFi360 User Manual.

  • Page 14: Wifi Command

    Command Description: - This setting is not saved to the Flash, the next reboot / after power is invalid. 3.2.2.2 AT+CWMODE_DEF : Set the operation mode, save to Flash Command string Function Description AT+CWMODE_DEF=<mode> Set the operation mode <mode>: Parameters - 1: Station mode (factory default) description - 2: SoftAP mode WizFi360 AT command...

  • Page 15: At+Cwdhcp_Cur : Dhcp Function Settings, Not Saved To Flash

    - 0: Sets softAP DHCP - 1: Sets Station DHCP Parameters - 2: Set both SoftAP DHCP and Station DHCP description <en>: - 0: Disable DHCP - 1: Enable DHCP Return Values \r\n OK\r\n descriptions Predecessors Examples Command: AT+CWDHCP_CUR=1,1\r\n WizFi360 AT command...

  • Page 16: At+Cwdhcp_Def : Setting Dhcp Function, Save To Flash

    Function Description AT+CWDHCP_DEF=<mode>,<en> Set the DHCP function <mode>: - 0: Sets softAP DHCP - 1: Sets Station DHCP Parameters - 2: Set both SoftAP DHCP and Station DHCP description <en>: - 0: Disable DHCP - 1: Enable DHCP WizFi360 AT command...

  • Page 17: At+Cipdns_Cur : Dns Server Settings, Not Saved To Flash

    3.2.2.5 AT+CIPDNS_CUR : DNS server settings, Not saved to Flash Command string Function Description AT+CIPDNS_CUR=<enable>[,<DNS server0>,<DNS server1>] Set the DNS server <enable>: Parameters - 0: Disable customize DNS server (factory default) - 1: Enable customize DNS server description <DNS server0>: First DNS server address WizFi360 AT command...
  • Page 18 Reply:\r\n OK\r\n Command string Function Description AT+CIPDNS_CUR? Query the DNS server Return value: +CIPDNS_CUR:<DNS server0>\r\n \r\n OK\r\n Return Values +CIPDNS_CUR: <DNS server0>\r\n descriptions +CIPDNS_CUR: <DNS server1>\r\n \r\n OK\r\n Description: Parameter above Command: AT+CIPDNS_CUR?\r\n Examples Reply: +CIPDNS_CUR: 114.114.114.114\r\n WizFi360 AT command...

  • Page 19: At+Cipdns_Def : Dns Server Settings, Save To Flash

    - <DNS server0> and <DNS server1> cannot be set to the same. Return Values \r\n OK\r\n descriptions Predecessors Command: AT+CIPDNS_DEF=1,"114.114.114.114","8.8.8.8"\r\n Example 1 Reply:\r\n OK\r\n Command: AT+CIPDNS_DEF=0\r\n Example 2 Reply:\r\n OK\r\n Command string Function Description AT+CIPDNS_DEF? Query the DNS server Return value: Return Values +CIPDNS_DEF:<DNS server0>\r\n \r\n descriptions OK\r\n WizFi360 AT command...

  • Page 20: At+Cipsta_Cur : Setting Ip Information Station Mode, Not Saved To Flash

    OK\r\n 3.2.2.7 AT+CIPSTA_CUR : Setting IP information Station mode, Not saved to Flash Command string Function Description Set the static IP AT+CIPSTA_CUR=<ip> [,<gateway>,<netmask>] <ip>: static IP address of WizFi360 station Parameters <gateway>: Gateway description <netmask>: Subnet Mask Return Values \r\n...

  • Page 21: At+Cipsta_Def : Setting Ip Information Station Mode, Save To Flash

    IP is enabled, DHCP will be disabled. The last configured command is set. 3.2.2.8 AT+CIPSTA_DEF : Setting IP information Station mode, save to Flash Command string Function Description Set the static IP AT+CIPSTA_DEF=<ip>[,<gateway>,<netmask>] <ip>: static IP address of WizFi360 station Parameters <gateway>: Gateway description <netmask>: Subnet Mask Return Values...

  • Page 22: At+Cipstamac_Cur : Set Station Mac Address Mode, Not Saved To Flash

    <mac>: MAC address of WizFi360 Station. Note: Parameters - Bit 0 of WizFi360 Mac address byte cannot be 01. For example, MAC address cannot be "01:08:DC:11:12:13" and can be "00:08:dc:11:12:13". description - The station MAC address is different from that of SoftAP. Please make sure that you do not set the same MAC address for both of them.

  • Page 23: At+Cipstamac_Def : Set Station Mac Address Mode, To Save Flash

    <mac>: MAC address of WizFi360 Station. Note: Parameters - Bit 0 of WizFi360 Mac address byte cannot be 1. For example, MAC address cannot be "01:08:DC:11:12:13" and can be "00:08:dc:11:12:13". description - The station MAC address is different from that of SoftAP. Please make sure that you do not set the same MAC address for both of them.

  • Page 24: At+Cipapmac_Cur : Set Softap Mac Address Mode, Not Saved To Flash

    <mac>: MAC address of WizFi360 softAP. Note: Parameters - Bit 0 of WizFi360 Mac address byte cannot be 01. For example, MAC address cannot be "01:08:DC:11:12:13" and can be "00:08:dc:11:12:13". description - The SoftAP MAC address is different from that of Station. Please make sure that you do not set the same MAC address for both of them.

  • Page 25: At+Cipapmac_Def : Set Softap Mac Address Mode, To Save Flash

    <mac>: MAC address of WizFi360 SoftAP. Note: Parameters - Bit 0 of WizFi360 Mac address byte cannot be 1. For example, MAC address cannot be "01:08:DC:11:12:13" and can be "00:08:dc:11:12:13". description - The SoftAP MAC address is different from that of Station. Please make sure that you do not set the same MAC address for both of them.

  • Page 26: At+Cwlap : Scanning Lists Available Ap Information)

    <ecn>: encryption of the AP - 0: OPEN descriptions - 1: WEP - 2: WPA_PSK - 3: WPA2_PSK - 4: WPA_WPA2_PSK <ssid>: AP's SSID <rssi>: AP signal strength RSSI <mac>: AP MAC address <channel>: AP channel Predecessors Examples Command: AT+CWLAP\r\n WizFi360 AT command...

  • Page 27: At+Cwlapopt : Ap Scan Results Display Settings

    <sort_enable>: It sets whether the result of AT+CWLAP command is sorted according to RSSI. - 0: Do not sort according to RSSI (factory default) Parameters - 1: Sort according to RSSI description <mask>: Set parameters to show in AT+CWLAP result. When Bit is 0 : Don’t showing WizFi360 AT command...

  • Page 28: At+Cwjap_Cur : Connects To An Ap, Not Saved To Flash

    (If the SSID or Password contains special characters such as ", \ and , you need an escape character ) description <bssid>: optional parameter, the target AP’s MAC address, used when multiple APs have the same SSID. Return Value: \r\n Return Values OK\r\n descriptions +CWJAP_CUR:<error code> \r\n WizFi360 AT command...
  • Page 29 AT+CWJAP_CUR? connected Return Value: +CWJAP_CUR:<ssid>,<bssid>,<channel>,<rssi>\r\n \r\n OK\r\n Return Values Description: descriptions <ssid>: SSID of AP connected <bssid>: MAC address of AP connected <channel>: Channel of AP connected <rssi>: RSSI MAC address of AP connected Examples Command: AT+CWJAP_CUR?\r\n WizFi360 AT command...

  • Page 30: At+Cwjap_Def : Connects To An Ap, Save To Flash

    -1: Connection timed out -2: Wrong password -3: Can not find the target AP -4: Connection Failed Predecessors AT+CWMODE_DEF=1\r\n Eg, AP's SSID is "ab\,c", the password is "12345678"\" and MAC address is "00:08:DC:11:12:13",the command is as follows: Examples Command: AT+CWMODE_DEF=1\r\n WizFi360 AT command...

  • Page 31: At+Cwautoconn : Automatic Connection To Ap

    Set the Automatic AT+CWAUTOCONN=<enable> connection to AP <enable>: Parameters - 0: Do not automatically connect to AP on power-up description - 1: Automatically connect to AP on power-up (factory default) Return Values \r\n OK\r\n descriptions Predecessors AT+CWMODE_DEF=1\r\n WizFi360 AT command...

  • Page 32: At+Cwqap : Disconnect From The Ap

    AT+CWQAP : Disconnect from the AP Command string Function Description Disconnecting the AT+CWQAP connection with the AP Parameters description Return Values \r\n OK\r\n descriptions AT+CWMODE_DEF=1\r\n Predecessors AT+CWJAP_DEF="WIZNETSZ","12345678"\r\n Command: AT+CWMODE_DEF=1\r\n Reply:\r\n OK\r\n Command: AT+CWJAP_DEF="WIZNETSZ","12345678"\r\n Examples Reply:\r\n OK\r\n Command: AT+CWQAP\r\n Reply:\r\n OK\r\n WizFi360 AT command...

  • Page 33: At+Cipap_Cur : Setting Ip Information Softap Mode, Not Saved To Flash

    3.2.2.19 AT+CIPAP_CUR : Setting IP information SoftAP mode, Not saved to Flash Command string Function Description AT+CIPAP_CUR=<ip>[,<gateway>,<netmask>] Set the static IP of SoftAP <ip>: IP address of WizFi360 SoftAP Parameters <gateway>: Gateway description <netmask>: Subnet Mask Return Values \r\n OK\r\n...

  • Page 34: At+Cipap_Def : Setting Ip Information Softap Mode, Save To Flash

    Example 1 Reply:\r\n OK\r\n Command: AT+CIPAP_DEF="192.168.0.1"\r\n Example 2 Reply:\r\n OK\r\n Command string Function Description AT+CIPAP_CUR? Query the static IP of SoftAP return value: +CIPAP_DEF:ip:<ip>\r\n Return Values +CIPAP_DEF:gateway:<gateway>\r\n descriptions +CIPAP_DEF:netmask:<netmask>\r\n \r\n OK\r\n Command: AT+CIPAP_CUR?\r\n Reply: Examples +CIPAP_DEF:ip:"192.168.0.1"\r\n +CIPAP_DEF:gateway:"192.168.0.1"\r\n WizFi360 AT command...

  • Page 35: At+Cwdhcps_Cur : Setting Ip Allocated By Wizfi360 Dhcp(Softap), Not Saved To Flash

    - 1: Enable setting the IP address range. The following parameters have to be set. Parameters <lease time>: lease time of the WizFi360 softAP. It is in the range of 1 to 2880, unit is minutes, and the default is 120 minutes.

  • Page 36: At+Cwdhcps_Def : Setting Ip Allocated By Wizfi360 Dhcp(Softap), Saved To Flash

    - 1: Enable setting the IP address range. The following parameters have to be set. Parameters <lease time>: lease time of the WizFi360 softAP. It is in the range of 1 to 2880, unit is minutes, and the default is 120 minutes.

  • Page 37: At+Cwsap_Cur : Configures The Wizfi360 Softap Mode, Not Saved To Flash

    The settings are saved to Flash, after the next reboot / power-up is still valid; This AT command is enabled when WizFi360 runs as SoftAP, and when DHCP is enabled. - <start IP> and <end IP> must be the same network segment.
  • Page 38 - 3: WPA2_PSK <max conn>: The maximum number of stations that can be connected to WizFi360. It can be set from 1 to 4, and the default value is set to 4. <ssid hidden>: enable or disable the information broadcast...

  • Page 39: At+Cwsap_Def : Configures The Wizfi360 Softap Mode, Save To Flash

    - 2: WPA_PSK description - 3: WPA2_PSK <max conn>: The maximum number of stations that can be connected to WizFi360. It can be set from 1 to 4, and the default value is set to 4. <ssid hidden>: enable or disable broadcast...

  • Page 40: At+Cwlif : Wizfi360 Softap List Of Connected Station

    Examples \r\n OK\r\n Command Description: - This setting will be saved to Flash, after the next reboot / power still valid. 3.2.2.25 AT+CWLIF : WizFi360 SoftAP list of connected Station Command string Function Description Query the list of connected AT+CWLIF...

  • Page 41: At+Cwhostname : Setting The Name Of Station

    OK\r\n Command Description: This command can not query a static IP address; This command is only valid when both DHCPs of the SoftAP, and of the Station to which WizFI360 is connected, are enabled. 3.2.2.26 AT+CWHOSTNAME : Setting the Name of Station...
  • Page 42 If the Station mode is not enabled, the command will return: descriptions +CWHOSTNAME:<NULL>\r\n \r\n OK\r\n Command: AT+CWHOSTNAME?\r\n +CWHOSTNAME:”WizFi360_FF6179”\r\n Examples \r\n OK\r\n Command Description: - This setting is not saved to the Flash, the next reboot / after power is invalid. WizFi360 AT command...

  • Page 43: Tcp / Ip Command

    If the TCP connection is disconnected, WizFi360 reestablished listening, waiting for a client connection. If +++ is input to exit the transmission, AT command can send from UART to WizFi360. 3.2.3.2 AT+SAVETRANSLINK : Stored data set to transparent mode Flash a.
  • Page 44 - 0: The AT command transmission mode is set on boot -1: The transparent transmission mode is set on boot Parameters <remote IP>: Destination IP address or domain address description <remote port>: Destination port number <type>: TCP(default) or UDP <UDP Local port>: local port number WizFi360 AT command...

  • Page 45: At+Cipmux : Multi-Connection Mode Setting

    Function Description Confirm single/multi AT+CIPMUX? connection mode +CIPMUX:<mode>\r\n Return Values \r\n descriptions OK\r\n Command: AT+CIPMUX?\r\n Reply: +CIPMUX:1\r\n Examples \r\n OK\r\n Command Description: Only in the AT command mode data transmission (AT+CIPMODE=0), can be set to a multi-connection mode; WizFi360 AT command...

  • Page 46: At+Cipserver : Established Tcp Server

    TCP Client Open <ID>: Network connection ID (0 ~ 4), it is used in case of multiple connection Parameters <type>: connection type, it should select the "TCP", "UDP" or ”SSL”, if select TCP, it establish the TCP description Client WizFi360 AT command...
  • Page 47 -1 to 7200: Keep alive packet transmission time interval in 1s \r\n OK\r\n \r\n Return Values ERROR\r\n descriptions \r\n ALREADY CONNECTED\r\n (If the TCP connection is already established.) Predecessors Command: AT+CIPSTART="TCP","192.168.1.99",5000\r\n Example 1 Reply:\r\n OK\r\n Command: AT+CIPSTART=1,"TCP","www.iwiznet.cn",5000,10\r\n Example 2 Reply:\r\n OK\r\n WizFi360 AT command...
  • Page 48 Note: The use of <UDP mode> Parameter must configure <UDP Local port> Parameter \r\n OK\r\n \r\n Return Values ERROR\r\n descriptions \r\n ALREADY CONNECTED\r\n (If the UDP communication is established) Predecessors Command: AT+CIPSTART="UDP","192.168.1.99",5000\r\n Example 1 Reply:\r\n OK\r\n Example 2 Command: AT+CIPSTART=1,"UDP","www.iwiznet.cn",5000,6000,2\r\n WizFi360 AT command...
  • Page 49 Command Description: WizFi360 only support to establish an SSL connection, if SSL connection operate, it doesn’t support data transparent mode; SSL will occupy more cache, if the cache size exceeds, it can cause restart. Users can increase the memory size by AT+CIPSSLSIZE command.

  • Page 50: At+Cipsslsize : Provided Ssl Cache Size

    <state>: WizFi360 as a network in the connection information mode Station descriptions - 2: WizFi360 Station is connected to the AP and is assigned IP - 3: TCP or UDP Communication is connected. - 4: TCP or UDP Communication is disconnected.

  • Page 51: At+Cipsend : Size Of The Transmit Data / Incoming Data Transparent Mode

    When sending "+++",then wait at least 1s issued an AT command. The commands must be the transparent mode If it is UDP transparent transmission, AT+CIPSTART of <UDP mode> parameter must be 0 Predecessors Command: AT+CIPSEND\r\n Examples Reply:> b. length (AT command mode) transmission data set WizFi360 AT command...
  • Page 52 <remote Port>: destination port number (It can be set in UDP mode) If this command is set successfully, return the following. And WizFi360 waits for the data to be transmitted. When data input is completed by the length set in <length>, WizFi360 starts data transmission.

  • Page 53: At+Cipsendex : Size Of The Transmit Data

    <remote Port>: destination port number (It can be set in UDP mode) If this command is set successfully, return the following. And WizFi360 waits for the data to be transmitted. When data input is completed by the length set in <length> or \0 is input in data, WizFi360 starts data transmission.

  • Page 54: At+Cipsendbuf : Writes Data Into The Tcp Send Buffer

    <length>: to write TCP transmission data length, the length of the discarded data exceeds description If this command is set successfully, return the following. And WizFi360 waits for the data to be transmitted. When data input is completed by the length set in <length>, WizFi360 starts data transmission.

  • Page 55: At+Cipbufreset : Resets The Segment Id Count

    Reset the segment ID Parameters <ID>: Network connection ID (0 ~ 4), it is used in case of multiple connection description Return Value: \r\n Return Values OK\r\n descriptions Description: Reset the segment ID used by AT + CIPSENDBUF. WizFi360 AT command...

  • Page 56: At+Cipbufstatus : Check Status Tcp Send Buffer

    <segment ID successfully sent>: TCP segment ID of last successfully sent <remain buffer size>: remain size of TCP send buffer <queue>: Available TCP queue number. But it is not reliable and only used for reference. Predecessors Command: AT+CIPBUFSTATUS\r\n Reply: \r\n Examples 20,15,10,200,7\r\n \r\n OK\r\n WizFi360 AT command...

  • Page 57: At+Cipcheckseq : Tcp Transmit Buffer Is Written Inquiry Of A Package Sent Successfully

    <ID>: Network connection ID (0 ~ 4), it is used in case of multiple connection <segment ID>: segment ID when CIPSENDBUF command use. description Return Value in single connection mode: <segment ID>,<status>\r\n \r\n OK\r\n Return Values Return Value in multi-connection mode: descriptions <ID>,<segment ID>,<status>\r\n \r\n OK\r\n Description: WizFi360 AT command...

  • Page 58: At+Cipdinfo : Received Data Format

    -1: Display the Destination IP address and port number (factory default) Return Values \r\n OK\r\n descriptions Predecessors Command: AT+CIPDINFO=1\r\n Examples Reply:\r\n OK\r\n 3.2.3.15 AT+CIPCLOSE : Close TCP / UDP connections Command string Function Description AT+CIPCLOSE[=<ID>] Close TCP/UDP connection WizFi360 AT command...

  • Page 59: At+Cifsr : Ip And Mac Address Information

    Return Values OK\r\n descriptions Description: <softAP IP address>: The SoftAP IP address of WizFi360 <softAP MAC address>: The SoftAP MAC address of WizFi360 <station IP address>: The Station IP address of WizFi360 <station MAC address>: The Station MAC address of WizFi360...

  • Page 60: At+Cipsto : Sets The Tcp Server Timeout

    OK\r\n descriptions AT+CIPMUX=1\r\n Predecessors AT+CIPSERVER=1,1001\r\n Command: AT+CIPMUX=1\r\n Reply: \r\n OK\r\n Command: AT+CIPSERVER=1,1001\r\n Examples Reply: \r\n OK\r\n Command: AT+CIPSTO=10\r\n Reply: \r\n OK\r\n Command string Function Description Query the TCP server AT+CIPSTO? Timeout Return Values +CIPSTO:<time>\r\n \r\n descriptions OK\r\n WizFi360 AT command...
  • Page 61 Command: AT+CIPSTO?\r\n Reply: +CIPSTO:180\r\n Examples \r\n OK\r\n WizFi360 AT command...

  • Page 62: Management Command

    AT version: 1.0.1.0 (Jun 6 2019 17:49:31)\r\n Examples SDK version: 3.0.0 (a0ffff9f)\r\n compile time: Jun 6 2019 17:49:31\r\n \r\n OK\r\n 3.2.4.2 AT+CIUPDATE : Update the Software Through Wi-Fi Command string Function Description Update the Software AT+CIUPDATE Through Wi-Fi Parameters description WizFi360 AT command...

  • Page 63: At+Cipdomain : Dns Function

    3.2.4.3 AT+CIPDOMAIN : DNS Function Command string Function Description AT+CIPDOMAIN=<domain name> DNS Function Parameters <domain name>: The domain name, to support the length of less than 64 description Return Value: +CIPDOMAIN:<ip address>\r\n \r\n Return Values OK\r\n descriptions DNS Fail\r\n \r\n ERROR\r\n WizFi360 AT command...

  • Page 64: At+Ping : Ping Packets

    Return Value: +<Time>\r\n \r\n OK\r\n Return Values \r\n descriptions ERROR\r\n Description: <Time>: response time of ping Predecessors Command: AT+PING=”www.google.com"\r\n Reply: +46\r\n Examples \r\n OK\r\n 3.2.4.5 AT+CIPSNTPCFG : SNTP and time zone setting function Command string Function Description WizFi360 AT command...

  • Page 65: At+Cipsntptime : Checks The Sntp Time

    SNTP and time zone AT+CIPSNTPCFG? information Return Values +CIPSNTPCFG:<enable>,<timezone>,<SNTP server1>[,<SNTPserver2>,<SNTP server3>]\r\n OK\r\n descriptions Command: AT+CIPSNTPCFG?\r\n Examples Reply: +CIPSNTPCFG:1,8,"cn.ntp.org.cn"\r\n OK\r\n 3.2.4.6 AT+CIPSNTPTIME : Checks the SNTP Time Command string Function Description AT+CIPSNTPTIME? Query the SNTPTIME Return Values Return Value: +CIPSNTPTIME:<time>\r\n descriptions WizFi360 AT command...
  • Page 66 OK\r\n Description: <time>: format "Week Month Date Hour: Minute: Second Year" Predecessors Command: AT+CIPSNTPTIME?\r\n Examples Reply: +CIPSNTPTIME: Thu Jan 01 00:00:00 1970\r\n WizFi360 AT command...

  • Page 67: Appendix

    TCP / IP protocol in the default list of ports that are already occupied Protocol Port Retention TCP port multi-channel server Retention ECHO Retention Retention Retention network status TELNET SMTP Printer Time Server Name Server Retention Log host protocol DHCP DHCP TETP Gopler Finger HTTP Remotely TELNET WizFi360 AT command...

  • Page 68: Copyright Notice

    NNTP SNMP SNMP Retention 160-223 Copyright Notice Copyright 2019 WIZnet Co., Ltd. All Rights Reserved. Technical Support: https://forum.wiznet.io/ Wiki : https://wizwiki.net Sales & Distribution: mailto:sales@wiznet.io For more information, visit our website at http://www.wiznet.io/ WizFi360 AT command...

Table of Contents