o
o
o
o
o
o
Notes
For more details on SmartConfig, please see
•
SmartConfig is only available in the ESP station mode.
•
The message
•
successfully acquired the AP information. ESP device will try to connect to
the target AP.
•
Message
Smartconfig connected Wi-Fi
successful.
Use command
•
other commands. Please make sure that you do not execute other
commands during SmartConfig.
Example
AT+CWMODE=1
AT+CWSTARTSMART
AT+CWSTOPSMART: Stop SmartConfig
Execute Command
Command:
AT+CWSTOPSMART
Response:
OK
Note
Irrespective of whether SmartConfig succeeds or not, please always
•
call
AT+CWSTOPSMART
release the internal memory taken up by SmartConfig.
Example
AT+CWMODE=1
AT+CWSTARTSMART
AT+CWSTOPSMART
AT+WPS: Enable the WPS Function
© Copyright 2021 WIZnet Co., Ltd. All rights reserved.
2: WPA_PSK
3: WPA2_PSK
4: WPA_WPA2_PSK
5: WPA2_ENTERPRISE
6: WPA3_PSK
7: WPA2_WPA3_PSK
Smart get Wi-Fi info
AT+CWSTOPSMART
before executing any other AT commands to
WizFi320 User Manual
ESP-TOUCH User
means that SmartConfig has
is printed if the connection is
to stop SmartConfig before running
Guide.
39