Wiznet WizFi320 User Manual page 32

Command:
AT+CWAUTOCONN=<enable>
Response:
OK
Parameters
<enable>:
•
o
o
Note
The configuration changes will be saved in the NVS area.
•
Example
AT+CWAUTOCONN=1
AT+CWAPPROTO: Query/Set the 802.11 b/g/n
Protocol Standard of SoftAP Mode
Query Command
Command:
AT+CWAPPROTO?
Response:
+CWAPPROTO=<protocol>
OK
Set Command
Command:
AT+CWAPPROTO=<protocol>
Response:
OK
Parameters
<protocol>:
•
o
o
o
© Copyright 2021 WIZnet Co., Ltd. All rights reserved.
1: Enable automatic connection to an AP when powered on.
(Default)
0: Disable automatic connection to an AP when powered on.
bit0: 802.11b protocol standard.
bit1: 802.11g protocol standard.
bit2: 802.11n protocol standard.
WizFi320 User Manual
32