Table of Contents
Advertisement
o
o
o
[<max conn>]: maximum number of stations that ESP SoftAP can
•
connect. Range: [1,10].
[<ssid hidden>]:
•
o
o
Notes
This command works only when
•
The configuration changes will be saved in the NVS area
•
if AT+SYSSTORE=1.
Example
AT+CWSAP="ESP","1234567890",5,3
AT+CWLIF: Obtain IP Address of the Station That
Connects to an ESP SoftAP
Execute Command
Command:
AT+CWLIF
Response:
+CWLIF:<ip
addr>,<mac>
OK
Parameters
•
<ip addr>: IP address of the station that connects to the ESP SoftAP.
<mac>: MAC address of the station that connects to the ESP SoftAP.
•
Note
This command cannot get a static IP. It works only when DHCP of both
•
the ESP SoftAP and the connected station are enabled.
AT+CWQIF: Disconnect Stations from an ESP
SoftAP
Execute Command
Function:
© Copyright 2021 WIZnet Co., Ltd. All rights reserved.
2: WPA_PSK
3: WPA2_PSK
4: WPA_WPA2_PSK
0: broadcasting SSID (default).
1: not broadcasting SSID.
WizFi320 User Manual
AT+CWMODE=2
or AT+CWMODE=3.
28
Advertisement
Table of Contents
