Exit Cover Ass'y - Muratec F-114 Service Manual

3.17 Exit Cover Ass'y

1. Before you remove the Exit Cover Ass'y, you should
remove:
- Scan Ass'y (see section 3.11)
- Sub High PBA (see section 3.14)
2. Remove the four screws securing the Exit Cover Ass'y
and remove it, as shown below.
Exit Cover Ass'y
Service Manual
All manuals and user guides at all-guides.com
Disassembly and Reassembly
3-14
3. Remove the Exit Gear and Bearing using a flat-blade
screwdriver, as shown below.
Then take out the Exit Roller.
Exit Gear
2
1
Bearing
Exit Roller