Muratec F-114 Service Manual page 63

4.1.1.2 Printer Paper Path
1) After receiving print job the printer feeds printing paper from the cassette or manual feeder.
2) The fed paper passes the paper feeding sensor. (Jam 0 occurs if the sensor is not operated within a cer-
tain time)
3) After passing the feed sensor the paper passes through the print process to the paper exit sensor.
(Jam 1 occurs if the sensor is not operated by the paper's leading edge within a certain time)
4) After passing the exit sensor paper exits from the set. (Jam 2 occurs if the trailing edge of the paper
does not pass the exit sensor within a certain time)
Engine Part
1
Paper Input (Cassette)
2
Paper Input (Manual Feed)
3
Paper Out (Face Down)
4
Paper Empty Sensor (Manual)
Service Manual
All manuals and user guides at all-guides.com
Alignment & Troubleshooting
Fuser
7
PR
1
4-3
3
L S U
Toner Cartridge
CR
DR
OPC SR
PTL
6
TR FR 4
5
5
Paper Empty Sensor (Cassette)
6
Paper Feed Sensor
7
Paper Exit Sensor
2