3.23 Transfer Ass'y
1. Before you remove the Transfer Ass'y, you should
remove:
- LSU (see section 3.18)
2. Remove the three screws securing the Transfer Earth
and remove it.
Transfer
Earth
Service Manual
All manuals and user guides at all-guides.com
Disassembly and Reassembly
3-20
3. Unplug the PTL Holder connector, then remove the
PTL Holder and PTL Lens, as shown below.
PTL
PTL
Lens
Holder
4. Release the frame latch at the R side of the Transfer
roller and lift the roller out. Release the latch on each
bush and lift them out.
Transfer
Roller
Bush
Samsung Electronics